BuildMetricLab

Concrete & Foundations

Self-Leveling Underlayment Calculator

Bags of self-leveling underlayment from floor area, average depth and the coverage on the bag, with waste and cost

Updated October 9, 2026 · Live

What this tool does

Works out how many bags of self-leveling underlayment a concrete floor needs before tile or vinyl, from the floor area, the average pour depth and the bag's coverage as the bag states it: an area at a thickness in the US, bag weight and consumption elsewhere. Adds a waste allowance, rounds up to whole bags and prices them.

Area times average depth plus waste, divided by what one bag fills at the coverage printed on it, rounded up to whole bags.

Inputs
ft²
in
ft²
in
%
$
Result

Bags Required

6

Floor Area
160.0 ft²
Average Pour Depth
1/4 in
One Bag Covers
30.0 ft² at this depth
Bags Before Waste
5.3
Waste Allowance (10%)
0.5 bags
Estimated Cost
$156.00
Before Pouring
Prime first; stay within the product's thickness range
Plain Estimate
From BrightScale Labs
Invoice maker
Quote at the door. Signed on the spot.
Estimates and invoices for trades, built while you are still in the room.
Scan to get
Get it onGoogle Play

People also use

Formula Used
N=⌈A⋅d⋅(1+w)C⌉,C=S⋅tN = \left\lceil \frac{A \cdot d \cdot (1 + w)}{C} \right\rceil, \quad C = S \cdot t
NN
Bags required
AA
Floor area (ft²)
dd
Average pour depth (in)
ww
Waste allowance as a decimal (10% = 0.10)
SS
Area one bag covers (ft²)
tt
Thickness that coverage is quoted at (in)

How the self-leveling underlayment calculator works

Underlayment is bought by the bag and used by the cubic inch, and the calculator bridges the two. It takes the floor area and the average depth of the pour, multiplies them into a volume, adds a waste allowance, and divides by what one bag fills to give the bag count, rounded up because nobody sells a third of a sack. The one figure that changes from product to product is what a bag fills, and it is written on the bag in the way the market expects: in North America as an area at a thickness, in the rest of the world as a consumption in kilograms per square metre per millimetre. The calculator takes it either way, and the One Bag Covers row turns it into the area a bag will do at your depth, which is the number to check against the floor before mixing.

The US default is a 160 ft² room poured at an average of 1/4 in with a bag rated at 30 ft² at 1/4 in, which is the figure on the ARDEX K 15 overview for its 55 lb bag. That is 5.3 bags, 5.9 with 10% waste, so six bags at $26 is $156. The metric default is 15 m² at 5 mm with a 25 kg bag at 1.6 kg per m² per mm, the consumption the Mapei Ultraplan Eco 20 data sheet gives: one bag covers 15.6 m² at 1 mm, or 3.1 m² at 5 mm, so the floor needs 4.8 bags, 5.3 with waste, and six bags again. Coverage scales with depth in both systems, so a bag rated at 30 ft² at 1/4 in does 40 ft² at 3/16 in and 10 ft² at 3/4 in, and the calculator does that conversion whatever thickness your bag is quoted at.

How deep to pour: the flatness the floor finish needs

The depth is not a choice so much as a consequence of how far the slab is from flat, and how flat it has to be depends on what goes on top. For resilient flooring in the United States, ASTM F710 sets the target: Custom Building Products' white paper on floor flatness quotes it as no more than 3/16 in in 10 ft and 1/32 in in 12 in, with the newer F-number method alongside. For ceramic and stone, the Tile Council of North America's Handbook article on concrete slabs puts it plainly: the tile contractor checks with a 10 ft straightedge, and the floor is allowed 1/4 in of variation in 10 ft for smaller tiles and 1/8 in in 10 ft for larger ones, because a long tile bridges a dip and rocks. In the UK, BS 8203 for resilient floor coverings does not set a flatness itself but measures it in grades, and a Contract Flooring Journal explainer describes how contractors check to SR1, a 3 mm deviation under a 2 m straightedge, with a 3 mm packer as the pass-fail gauge. Vinyl, especially sheet and luxury vinyl tile, telegraphs every ridge through to the surface, so it is the finish that most often forces a full pour rather than a patch.

Measuring the floor is the half of the job that decides the bag count. Lay the longest straightedge you have across the room in several directions, or shoot a laser line, and record the gap at each point; the deepest reading sets the minimum pour at that spot, and the average over the floor is the depth to enter. A floor that is flat except for one trough is better entered as two areas, most of it at the thin minimum and the trough at its own depth, and the two bag counts added. Where the low point is beyond the product's range, fill it first and level over the top.

Thickness range, priming and moisture

Every product has a range it will level in. ARDEX K 15 installs from 1/8 in to 1 1/2 in neat (3 mm to 4 cm) and up to 5 in with aggregate; Mapei's Ultraplan Eco 20 is 1 to 10 mm per coat. The Custom white paper puts the general span for cementitious underlayments at 1/8 in up to 1 1/2 in, sometimes 2 in, in one application, feather-edged to nothing at a transition. A room whose low spot is 3/4 in down and whose high points need only a skim is inside the range at the deep end, but the thin end feathers to nothing at the high points, which the makers allow at a transition and which is exactly where a pour lets go if the primer is skipped; a 1/16 in skim over a whole floor is below most products' minimum and sits on the surface as dust. Priming comes first. The same white paper explains that the primer both bonds the underlayment to the concrete and seals the surface so the mix flows rather than losing its water into the slab; the ARDEX and Mapei sheets each name primers by substrate. Moisture is the other gate: makers and the resilient flooring standards set limits on the slab's vapour emission or internal humidity, measured by the calcium chloride test (ASTM F1869) or in-slab probes (ASTM F2170), and the white paper gives under 5 lb per 1,000 ft² per 24 h or 80% relative humidity for its own products, with a moisture vapour barrier before the pour where the slab reads higher. The calculator counts none of this; it counts bags.

Worked examples

A 400 ft² basement slab to take luxury vinyl plank, straightedged at an average of 3/16 in low, with the 30 ft² at 1/4 in bag: 400 × 3/16 is 75 ft²·in, and a bag holds 7.5 ft²·in, so 10 bags exactly, 11 with 10% waste, $286 at $26. A 120 ft² laundry room with a 1/2 in dip to a drain, using a 40 ft² at 1/8 in bag and 15% waste because the pour is deep and uneven: 60 ft²·in against 5 ft²·in a bag is 12 bags, 13.8 with waste, 14 bags and $448 at $32. In metric, a 40 m² open-plan floor skimmed at 3 mm with the 25 kg bag at 1.6: one bag does 5.2 m² at that depth, so 7.7 bags, 8.4 with waste, nine bags and £162 at £18. A 12 m² wet room built up 20 mm with a 1.7 consumption product: 0.74 m² a bag, 16.3 bags, 17.1 with 5% waste, 18 bags.

Waste, and the part bag

The default allowance is 10%. Leveler runs into cracks, joints and the low spots the straightedge missed, some stays in the bucket or pump, and a mix that starts to set before it is poured is a bag lost. The allowance is applied before rounding, so on the US default it turns 5.3 bags into 5.9 and the round-up to six happens anyway; on a larger floor it is the difference between finishing and stopping with a visible joint. Raise it for a floor measured at only a few points, for hand mixing in small batches, and for deep pours where the surface area of the gaps is large; drop it only for a floor that has been measured closely and sealed. The rounding margin is not spare: a floor that needs 5.3 bags and gets six has two-thirds of a bag in hand, and a floor that needs 5.9 has a tenth.

What the calculator leaves out

It does not pick the product, the primer or the mixing water, and it does not know whether the floor is concrete, plywood or tile; wood floors need stiffness and reinforcement that the makers specify separately. It does not include the patching compound for the deep spots, the moisture barrier, or the finish. And it does not measure the floor: the depth you enter is the whole estimate, and the floor screed calculator covers the thicker sand and cement build-ups that are outside an underlayment's range.

Using this with other BuildMetricLab tools

The self-leveling compound calculator in the flooring section runs the same sum for a floor finish of any kind; this page sits with the concrete tools for the slab prep before tile and vinyl. The tile calculator and the laminate flooring calculator cover what goes on top. All BuildMetricLab tools run in your browser with no sign-up, and the formula is on the page so the maths can be checked.

Sources & methodology

Bags = ⌈floor area × average depth × (1 + waste %) ÷ coverage per bag⌉, where coverage per bag is an area × depth figure: on the US side the bag's stated area × the thickness it is quoted at (ARDEX K 15: 30 ft² at 1/4 in), on the metric side bag weight ÷ consumption (Mapei Ultraplan Eco 20: 25 kg ÷ 1.6 kg/m²/mm = 15.6 m²·mm). One Bag Covers at the entered depth = coverage ÷ depth. US inputs are converted to m² and mm before the sum. Thickness ranges and priming from the product sheets; flatness targets from ASTM F710 (3/16 in in 10 ft, via the Custom Building Products white paper), TCNA Handbook guidance (1/4 in in 10 ft for smaller tiles, 1/8 in for larger) and BS 8203 SR1 (3 mm under 2 m) via Contract Flooring Journal.

Frequently asked questions

Are self-leveling underlayment calculator results accurate enough to order materials?

Yes, provided the depth is the measured average across the floor and the coverage comes from the bag you are buying, entered the way the bag states it. The waste allowance covers the gaps and the bucket, and the count rounds up to whole bags, so the result is what to order; keep the allowance, because running out partway through a pour leaves a joint in the floor.

Does the bag count already include a safety margin?

The round-up is a side effect, not a margin: a floor that needs 5.9 bags gets six, a tenth of a bag spare. The margin is the waste allowance, 10% by default and applied before the rounding, for leveler that runs into cracks and low spots, what stays in the bucket or pump and a batch that sets early. Raise it for a floor measured at only a few points or a deep, uneven pour.

Is this a substitute for professional advice?

No. It counts bags; it does not check the slab for moisture or flatness, pick the primer, or say whether the product's thickness range suits the floor. Resilient flooring and tile each have substrate flatness standards (ASTM F710 for resilient flooring and the TCNA Handbook for tile in the US, BS 8203 in the UK) and the underlayment maker's instructions govern the pour. For anything affecting structure, gas, electrics, plumbing or drainage to a public sewer, use a suitably qualified professional.

Can I change the unit prices?

Yes. The price per bag is yours, and so is the bag itself: enter the coverage and the thickness it is quoted at on the US side, or the bag weight and consumption on the metric side, and the cost is the whole bags needed at that price.

Spotted something off?

Calculations or display — let us know.

Calculators from other categories that planners often reach for next.