Masonry & Brickwork
Brick Calculator
Calculates bricks needed for walls or veneer
Updated May 13, 2026 · Live
What this tool does
Calculates bricks needed for walls or veneer. Modular, queen, and standard brick sizes.
Estimates the number of modular bricks needed to cover a wall or veneer area entered in square feet.
People also use
Formula Used
Formula Used
How the brick calculator works
Bricks are ordered by the piece, so the calculator turns a wall area into a brick count. It multiplies the wall area by the number of bricks that fill one unit of area, by the number of skins (wythes), and by a wastage allowance, then rounds up: N = ⌈A × r × k × (1 + w)⌉. It multiplies the count by your price per brick for a cost. It runs in your browser and shows its formula.
The US default is 200 ft² (18.6 m²) of single-wythe wall at 6.9 bricks per ft² (74 per m²), which is the rate for a modular brick. That is 200 × 6.9 = 1,380 bricks, and 5% wastage makes 1,449. At $0.70 each the cost is $1,014.30. The metric default is 20 m² of single-skin wall at 60 bricks per m². That is 1,200 bricks, or 1,260 with 5% wastage, and 693.00 at 0.55 each. A double skin, as in a cavity wall, doubles the count to 2,520.
Typical brick wastage
The default of 5% suits a plain wall laid in stretcher (running) bond with few openings. Patterned bonds, many openings, curves, and bricks cut to fit around windows and corners need more, and 10% is common. On the metric default, 10% raises the order from 1,260 to 1,320 bricks. Breakage during delivery and handling also matters, and bricks come in packs, so round up to whole packs. Buy the full quantity in one go, because a later batch can differ in colour.
What this tool does not do
It counts bricks and nothing else. It does not price mortar, ties, damp-proof course, lintels or labour, and it does not work out the area for you. Measure each wall as length × height and subtract the large openings, such as doors and windows, then add the walls together. It assumes a simple wall: gable ends and walls with piers or special shapes should be split into rectangles and triangles. It does not check structural adequacy and is not a quote.
On-site considerations for brick
The bricks-per-area figure is the number you are most likely to get wrong. It comes from the brick face size plus the mortar joint: r = 1 ÷ ((length + joint) × (height + joint)). A modular US brick, 7⅝ × 2¼ in with a ⅜ in joint, covers 8 × 2.625 = 21 in², so the rate is 144 ÷ 21 = 6.86 per ft², which the default rounds to 6.9. A UK brick of 215 × 65 mm with a 10 mm joint covers 225 × 75 mm, so the rate is 59.26 per m², and the default of 60 rounds up by about 1%. For your own brick, enter the figure from the supplier or work it out this way. On that basis, 20 m² at 59.26 per m² needs 1,245 bricks, not 1,260.
Wet weather slows mortar curing and can wash out the joints, so protect fresh work with sheeting. Fresh mortar needs protection from frost, and masonry codes set cold-weather rules below about 40°F (4°C). Keep bricks dry on site, because wet brick can show efflorescence, a white salt stain on the face.
Codes and compliance
Masonry construction is regulated, and the rules vary by country. Loadbearing masonry in the US follows TMS 402/602, the Building Code Requirements and Specification for Masonry Structures from The Masonry Society, and brick ties, flashing and weep holes are code requirements. The Brick Industry Association publishes technical guidance for US brickwork. In England, the structure of a building is covered by Approved Document A of the Building Regulations. Other regions have their own standards. A wall that carries load, retains soil or forms part of a new building usually needs a design by a chartered or licensed structural engineer, and you should check with your local building department whether a permit is needed.
Before you order
Confirm the exact brick size and the joint thickness, and enter the bricks-per-area figure that matches them. Ask the supplier how bricks are packed and delivered, whether the price is per brick, per thousand or per pack, and when the delivery will arrive. Order bricks by the full pallet or strap and keep them dry. Check that the batch is consistent, and mix bricks from several packs while you lay them so that any colour variation does not show as bands. Keep a few spare for repairs.
Adjusting the defaults
Every input is editable. Enter your own wall area, the bricks per unit area for your brick, the number of skins, the wastage and the price per brick, and the result recalculates as you type. The defaults are placeholders, not market prices. Leave the price blank if you only want the brick count.
Using this brick calculator alongside other BuildMetricLab tools
The CMU, stone wall and net wall area calculators in the same category cover other masonry and help you find the wall area. Every BuildMetricLab tool runs in your browser with no sign-up and nothing sent to a server, and each one shows its formula so you can check the maths.
Sources & methodology
Bricks = ⌈wall area × bricks per unit area × skins × (1 + wastage %)⌉, rounded up to whole bricks. Bricks per unit area = 1 ÷ ((length + joint) × (height + joint)): 6.86 per ft² for a 7⅝ × 2¼ in modular brick with a ⅜ in joint (default 6.9), and 59.26 per m² for a 215 × 65 mm brick with a 10 mm joint (default 60). Cost = bricks × price per brick. Mortar, ties, lintels, damp-proof course, labour and pack rounding are not modelled. A blank area, rate, skins, wastage or price field is refused. Every result is calculated from the values you enter, all inputs are editable, and no time-sensitive prices or rates are embedded.
Frequently asked questions
Are brick calculator results accurate enough to order materials?
Use them as a starting estimate. The count is exact for the wall area, bricks per area, skins and wastage you enter, but the real figure depends on the bond, the openings, the cuts and the actual brick and joint size. Check the quantity with your supplier before ordering.
What wastage percentage should I use?
The calculator defaults to 5%, which suits a plain wall in running bond. Use about 10% for patterned bonds, many openings, curves or lots of cutting. On the default 1,200 bricks, 10% makes 1,320 instead of 1,260. Lower values risk running short, because breakage and cuts are hard to avoid.
Is this a substitute for a licensed contractor or engineer?
No. This tool is a planning estimator. For work that affects structure or building code compliance, consult a licensed contractor or design professional. A loadbearing wall usually needs a structural engineer's design.
Can I change the unit prices?
Yes. Enter the price per brick from your supplier's quote. The default is a placeholder, not a market price. Leave the price blank if you only want the brick count.
Spotted something off?
Calculations or display — let us know.
Related tools
Calculators from other categories that planners often reach for next.













