Flooring
Flooring Calculator
Calculates flooring area to order from room size and wastage
Updated May 13, 2026 · Live
What this tool does
Calculates the flooring area to order from the room length, width and a wastage allowance, with a material cost from the price per area you enter.
Estimates total flooring square footage to order, including a customizable waste factor for cuts and fitting losses.
People also use
Formula Used
Formula Used
How the flooring calculator works
The calculator multiplies the room length by the width to get the floor area, then adds a wastage allowance for cuts and offcuts. The formula is A = L × W × (1 + w), where w is the wastage as a decimal. The cost is that area times your price per unit of area, and it is left out if you clear the price box. It works for any flooring sold by area, including tile, laminate, vinyl, carpet and boards.
Worked example with the US defaults: a 14 ft × 10 ft room is 140 ft². With 10% wastage you need 140 × 1.1 = 154 ft², which at $2.50 per ft² costs 154 × 2.5 = $385. The metric default is a 4 m × 3 m room, 12 m², and with 10% wastage that is 13.2 m². At £18 per m² the cost is 13.2 × 18 = £237.60. The two examples are about the same room: 14 ft is 4.27 m and 10 ft is 3.05 m, and 154 ft² is 14.3 m². Prices convert the other way, so $2.50 per ft² is $26.91 per m² and £18 per m² is £1.67 per ft². 1 m² is 10.7639 ft².
For a diagonal layout at 15% wastage, a 5 m × 4 m room is 20 m² × 1.15 = 23 m². The calculator gives an area, not a pack count. To turn the area into packs, divide by the coverage printed on one pack and round up. For example, 13.2 m² ÷ 2.0 m² per pack is 6.6, so 7 packs.
Typical US flooring wastage
Offcuts, damaged pieces and the cut at each wall all take material. A common planning allowance is about 10% for a plain rectangular room with a straight lay, 15% for diagonal, herringbone or chevron patterns, and a further 5% for a pattern that must be matched. Small, awkward rooms with many cuts need more. These are trade rules of thumb, not standards, and installers and manufacturers sometimes recommend different figures, so use the one on your product's installation guide. Lower the allowance only if you have a cutting plan that proves a lower figure.
What this tool does not do
It measures a single rectangle, so it does not handle L-shaped rooms, alcoves or fixed units on its own. For an irregular room, split it into rectangles, run the tool once for each and add the results. It does not round to whole boxes, add underlay, adhesive, trims, transitions or skirting, or price labour. It does not check the subfloor. The cost is a material cost from the price you enter, not a quote.
On-site considerations for flooring
Check the subfloor before you order. It should be dry, flat and firm. A floor that flexes will crack rigid finishes such as tile, so stiffen it or follow the manufacturer's advice on a decoupling layer. Wood products take up or lose moisture with the air around them, so many manufacturers ask you to let boxes sit in the room before laying. The USDA Forest Service Wood Handbook explains how wood moisture content follows humidity. Measure carefully at the widest points and include areas under appliances you will move, but not areas under permanent cabinets, and check your product's instructions for expansion gaps at the walls.
Codes and compliance
Flooring is mostly a finishing choice, but some rules apply. Moisture control under floors on the ground, fire performance in escape routes, and electrical safety for underfloor heating are covered by local building rules, which differ by country. In England, Approved Document C covers moisture and ground contamination, and Part P covers electrical safety in dwellings. Electric underfloor heating should be fitted by a qualified electrician. Check your local building department's requirements before you start.
Before you order
Buy all the flooring for a room at the same time, from the same batch, because colour and shade vary between production runs. Whole boxes are normally sold, and open packs are often not returnable, so confirm the return policy. Keep one unopened spare box for later repairs, since the same batch may not be available again. Compare the area from this calculator with the supplier's own estimate, and ask what the stated coverage per box includes.
Adjusting the defaults
Every input can be edited. Enter your room length and width, your wastage allowance and the price. Length and width must be above zero, wastage can be 0% or more, and a blank box returns a message instead of a result, so an empty field is never read as zero or replaced by a default. The currency symbol is only a label, and the tool does not convert money. A fractional wastage such as 7.5% is shown as typed.
Using this flooring calculator alongside other BuildMetricLab tools
Use the area to order the floor covering, then price the underlay, adhesive and trims with the specific flooring calculators linked on this page, such as laminate, hardwood and vinyl. All BuildMetricLab tools run in your browser with no sign-up, and every formula is shown on the page so you can check the arithmetic yourself.
Sources & methodology
The area to order is A = L × W × (1 + w), where L and W are the room length and width and w is the wastage as a decimal. Cost is that area times the price per unit of area. The 10% default wastage is a common planning allowance for a straight lay, not a standard. Lengths are held internally in metres and areas in m² (1 ft = 0.3048 m, 1 m² = 10.7639 ft²). The tool treats the room as one rectangle and does not round to boxes. Blank, zero or negative length or width, blank or negative wastage, and a negative price return a message instead of a result.
- NIST: Guide for the Use of the International System of Units (SP 811), for unit conversions
- USDA Forest Service: Wood Handbook, Wood as an Engineering Material (wood and moisture)
- GOV.UK (England): Approved Document C, site preparation and resistance to contaminants and moisture
- GOV.UK (England): Approved Document P, electrical safety in dwellings
Frequently asked questions
Are flooring calculator results accurate enough to order materials?
They are a good starting figure for one rectangular room. The result is an area, not a box count, so divide by the coverage on one box and round up. Measure the room carefully and confirm the quantity with your supplier before ordering.
What wastage percentage should I use?
About 10% suits a plain rectangular room with a straight lay, 15% suits diagonal, herringbone or chevron patterns, and a pattern that must be matched can need about 5% more. These are common planning figures, not standards, and your product's installation guide may give a different one. The default is 10%.
Is this tool a substitute for a contractor or design professional?
No. It is a planning estimator for material quantity and cost. It does not check the subfloor, moisture or building rules. For structural repairs, underfloor heating or work in a fire escape route, use a qualified professional and check your local building rules.
Can I change the unit prices?
Yes. The room size, wastage and price are all editable. Enter your supplier's price per unit of area, or clear the price to hide the cost row.
Spotted something off?
Calculations or display — let us know.
Related tools
Calculators from other categories that planners often reach for next.













