BuildMetricLab

Concrete & Foundations

Cement Bags Calculator

Estimates how many bags of premix concrete a project needs from its volume and the bag size

Updated October 29, 2026 · Live

What this tool does

Estimates the number of bags of premix concrete needed to fill a volume, from the bag weight and its labelled yield, with the dry weight to move and an optional cost.

Cement Bags Calculator: bags = volume ÷ (bag weight × yield per unit weight), rounded up, with dry weight and optional cost.

Inputs
yd³
lb
$
Result

80 lb Bags Required

30 bags

Volume
0.66 yd³
Estimated Cost
$225.00
Dry Weight
1.20 tons
Price it on PlainEstimate

Opens these materials as a new estimate on PlainEstimate, our free estimate and invoice app.

Plain Estimate
From BrightScale Labs
Invoice maker
Quote at the door. Signed on the spot.
Estimates and invoices for trades, built while you are still in the room.
Scan to get
Get it onGoogle Play

People also use

Formula Used
N=⌈Vy⌉N = \left\lceil \frac{V}{y} \right\rceil
NN
Bags required
VV
Concrete volume needed
yy
Yield per bag: bag weight × yield per unit weight (0.0075 ft³ per lb on the US side; 0.011 m³ per 25 kg on the metric side)

How the cement bags calculator works

Bags = concrete volume ÷ (bag weight × yield per unit of weight), rounded up to a whole bag. Enter the volume of concrete you need, the weight printed on the bag and, if you want a cost, the price of one bag. The calculator returns the bag count, the total dry weight to carry and the cost. With the US defaults, 0.66 yd³ (17.82 ft³, or 0.50 m³) of concrete in 80 lb bags that each yield 0.60 ft³ is 29.7 bags, which rounds up to 30, weighs 2,400 lb (1,089 kg) and costs $225 at $7.50 a bag. On the metric side the defaults are 0.5 m³ in 25 kg bags yielding 0.011 m³ each: 45.5 bags, rounded up to 46, which is 1,150 kg.

The yield is the number that matters. US bags are labelled in cubic feet, and the Quikrete data sheet for its 1101 concrete mix lists 0.30 ft³ for a 40 lb bag, 0.375 ft³ for 50 lb, 0.45 ft³ for 60 lb, 0.60 ft³ for 80 lb and 0.675 ft³ for 90 lb, all 0.0075 ft³ per pound, which is what the US side uses. Metric bags vary by brand and mix; published 25 kg yields run from about 0.011 to 0.012 m³, and the tool uses 0.011 m³, the cautious end, so it errs towards buying one bag too many rather than too few. A product with a different label yield will give a different count, so check the bag.

Typical concrete and foundations wastage

Bags are sold whole and the last one is rarely used up, which the rounding already covers. The bigger loss is the volume itself: uneven ground, forms that bow, spillage in the mixer and a pour that finishes a little deeper than planned. Adding about 10 percent to the volume before you enter it is a sensible allowance for a small DIY pour; a flat slab on a well-prepared base needs less, and a trench footing in rough ground needs more. A 10 × 10 ft slab 4 in thick is 33.3 ft³ (0.94 m³), which is 55.6 bags of 80 lb, so 56 with no allowance and 62 once 10 percent is added. A 3 × 3 m slab 100 mm thick is 0.9 m³, which is 81.8 bags of 25 kg, so 82 bare and 90 with 10 percent added.

What this tool does not do

It does not calculate the volume for you, so work that out first from length, width and depth (the slab, footing and wall calculators do this). It does not add wastage, choose a mix strength, or tell you whether bagged concrete is the right product. It also does not know the yield of your specific brand, which is why the bag size and the label matter more than the price. Treat the count as a purchasing estimate and buy a few bags over.

On-site considerations for cement bags

Mixing is the limit on bagged concrete. A barrel mixer needs about 1 ft³ (28 L) of capacity for each 80 lb bag, according to the Quikrete data sheet, so a batch of 10 bags needs a large mixer or several batches, and every batch must be placed before it starts to set. The weight adds up: 62 bags of 80 lb is 4,960 lb (2,250 kg) to move and stack, and one cubic yard is 45 bags (one cubic metre is about 91 bags of 25 kg). Once the job needs more than a cubic yard or so (about 0.8 m³), ready-mixed delivery is usually quicker and gives a more consistent result, so compare a quote before committing to a long day of mixing. Keep bags dry and off the ground until use, because damp cement hardens in the bag, and avoid placing in frost or strong heat without protection.

Codes and compliance

Footings, structural slabs and anything load bearing are governed by the building code where you are: the International Residential Code in most of the United States, with reinforcement and concrete strength set by ACI 318, and the equivalent national or provincial codes in Canada, England, Australia and elsewhere. Bagged mixes state their strength on the label, and it should be checked against what the design requires. The calculator does not size footings or check frost depth, which depend on your location. Structural pours should follow an engineer's drawing, and the local building department can say when an inspection is needed before concrete is placed.

Before you order

Work out the volume in one unit, add your allowance, and read the yield on the actual bag you will buy. If the label gives a different yield from the one the tool assumes, divide your volume by that yield instead. Check the bag weight too: the same product is often sold in several sizes, and the price per cubic foot or metre can differ a lot between them. Ready-mixed concrete is ordered by volume, strength class, slump and aggregate size, and a supplier will ask for these.

Adjusting the defaults

Every field is editable and the result updates as you type. The volume must be above zero, the bag size runs from 20 to 100 lb (5 to 40 kg on the metric side), and the price is optional. Leaving the price blank shows the bag count and weight without a cost. The default prices are placeholders, not current shop prices. Switching to metric changes the inputs to cubic metres and kilograms; the US side counts bags by the pound weight on the label.

Using this cement bags calculator alongside other BuildMetricLab tools

The concrete wall calculator and concrete steps calculator give the volume to enter here, and the rebar calculator covers reinforcement. Every BuildMetricLab tool runs in your browser, with no sign-up and no data sent anywhere, and the formula is shown on the page so the maths can be checked.

Sources & methodology

Bags = ceil(V ÷ (W × y)), where V is the concrete volume, W the bag weight and y the yield per unit weight. US side: y = 0.0075 ft³ per lb, from the QUIKRETE Concrete Mix 1101 data sheet (40 lb 0.30 ft³, 50 lb 0.375 ft³, 60 lb 0.45 ft³, 80 lb 0.60 ft³, 90 lb 0.675 ft³); the inputs are in yd³ and lb and converted at 0.764554857984 m³ per yd³ and 0.45359237 kg per lb. Metric side: a 25 kg bag is taken to yield 0.011 m³, the cautious end of the roughly 0.011 to 0.012 m³ published for 25 kg bags, scaled linearly by weight. The result is rounded up to a whole bag with a tiny tolerance for floating-point error, dry weight is bags × bag weight, and cost is bags × price. An empty or non-positive volume or bag size is refused, a negative price is refused, and a blank price omits the cost. No wastage is added.

Frequently asked questions

Are cement bags calculator results accurate enough to order materials?

They are a good purchasing estimate when the volume is right and the yield matches your bag. The arithmetic is exact: volume ÷ (bag weight × yield per unit weight), rounded up. The assumed yield is 0.0075 ft³ per lb on the US side (Quikrete's labelled 0.60 ft³ for an 80 lb bag) and 0.011 m³ per 25 kg bag on the metric side, and other brands differ, so check the label. Add an allowance for wastage and buy a few bags over.

Does the calculator add a wastage allowance?

No. It returns the bare bag count for the volume you enter, rounded up to a whole bag. Spillage, uneven ground and a pour that comes out slightly deeper than planned are not included. Adding about 10 percent to the volume before entering it is a sensible allowance for a small pour (a 10 × 10 ft slab 4 in thick goes from 56 to 62 bags of 80 lb), and rough ground or first-time work may justify more.

Is this a substitute for professional advice?

No. It is a planning estimator. The strength, reinforcement, depth and frost protection a footing or structural slab needs are set by the building code where you are and by an engineer's design where required. For work that affects structure, building code compliance, plumbing or drainage to a public sewer, consult a licensed contractor or a chartered or licensed structural engineer as applicable.

Can I change the unit prices?

Yes. The price per bag is editable and takes any figure in the page currency. Leave it blank to see the bag count and weight without a cost. Enter the price on the shop label or quote, and note that the same product can cost a different amount per cubic foot or metre in different bag sizes.

Spotted something off?

Calculations or display — let us know.

Calculators from other categories that planners often reach for next.