BuildMetricLab

Project Cost Estimators

New Home Build Cost Calculator

New home build cost from floor area, build rate, contingency and tax

Updated May 13, 2026 · Live

What this tool does

Estimates the construction cost of a new home as the gross floor area times an all-in build rate, plus a contingency and any sales tax.

Estimates a planning-level new home construction cost from the gross floor area, an all-in build rate, a contingency and an optional sales tax.

Inputs
ft²
$
%
%
Result

New Build (incl. contingency)

$357,500.00

Area
1,300.0 ft²
Build Rate
$250.00/ft²
Base Cost
$325,000.00
Contingency @ 10%
$32,500.00
Planning Note
Figure assumes straightforward access; complex site conditions can add roughly 15–30%
Plain Estimate
From BrightScale Labs
Invoice maker
Quote at the door. Signed on the spot.
Estimates and invoices for trades, built while you are still in the room.
Scan to get
Get it onGoogle Play

People also use

Formula Used
C=A⋅r⋅(1+g100)(1+t)C = A \cdot r \cdot \left(1 + \frac{g}{100}\right)(1 + t)
CC
New build cost
AA
Gross floor area
rr
Build rate per ft² (editable)
gg
Contingency percentage
tt
Tax rate

How the new home build cost calculator works

A new house costs more than its floor area suggests, because the site, the design and the specification matter as much as size. This calculator gives a budget in one line: gross floor area × build rate, plus a contingency, plus any sales tax. It works in square feet here and in square metres on the metric version, and the two give the same total.

The formula is C = A × r × (1 + g ÷ 100) × (1 + t ÷ 100), where A is the gross floor area, r the all-in rate per unit area, g the contingency percentage and t the tax percentage. Tax applies to the base cost plus contingency.

Example with the defaults on this page: 1,300 ft² at $250 per ft² is $325,000. A 10% contingency adds $32,500, giving $357,500, and there is no tax line at the default 0%. With a 6% sales tax on top the total is $357,500 × 1.06 = $378,950. In metric, 1,300 ft² is 120.8 m² and $250 per ft² is about $2,691 per m², so the same house is 120.8 × $2,691 = $325,000 again.

The tier changes the answer a lot. The same 1,300 ft² at the budget rate of $165 comes to $214,500, or $235,950 with contingency. At the premium rate of $370 it is $481,000, or $529,100 with contingency. For context, the National Association of Home Builders' 2024 survey of builders reported average construction cost of about $162 per ft² (about $1,744 per m²) excluding land, so the budget tier here is close to that survey average and the others sit above it.

What the build rate covers

The build rate is an all-in figure per unit of floor area for the construction of the house: groundworks and foundations, structure, roof, windows, fit-out, services, labour and the builder's overhead and margin. It does not include the lot, site clearance, utility connections, the septic system or well if there is no mains, driveway and landscaping. Ask each builder what is in the quote, because a rate that leaves out groundworks, kitchens or services looks lower than it is.

The planning tiers in the tooltip are about $165, $250 and $370 per ft² for budget, mid and premium work. They are examples chosen to bracket a range, not published statistics, and regional variation is large. Replace them with a quote. The contingency then sits on top to absorb costs that only appear once the ground is opened and the design is detailed.

What this tool does not do

It does not cost land, design fees, finance, furniture or landscaping, and it does not produce a bill of quantities. It does not check the design, the structure, ground conditions or the services. Floor area is only one driver of cost, so a small house with a complex shape and a high specification can cost more per unit of area than a large plain one. It is not a substitute for a quote.

On-site considerations for new home build cost

The site often decides the budget. Sloping ground, poor soil, rock, a high water table, a long driveway or a distance from services each add cost, and a ground investigation before you commit is cheap against the cost of a surprise. Shape matters too: a simple rectangular footprint and roof is cheaper per unit of area than a house with many corners and changes of level.

Specification drives the rest. Windows, kitchens, bathrooms, heating, insulation and finishes each move the rate between tiers. Decide the specification before you ask for quotes, so that they compare like with like. Allow time for the build, as costs rise with delay and with changes made after work starts.

Codes and compliance

In the United States a new house needs a building permit with plan review and inspections at each stage, set by state and local codes built on the International Residential Code. Sales tax on materials and labour varies by state, so the tax field defaults to 0. Impact fees, utility connection charges and permit fees are separate from construction cost, so ask your building department for a fee schedule.

Before you order

Break your budget into land, build cost, design and permit fees, utility connections, finance and contingency from the outset. Contingency of 10 to 20% is a planning habit on a new build, not a published standard, and a difficult site or a changing design sits at the top. Get at least three written, itemised quotes and compare what each includes. Once you have quotes, replace the default rate with the lowest you trust and the highest you have seen to bracket the range.

Adjusting the defaults

Every input is editable. Enter your own area, build rate, contingency and tax rate and the output recalculates instantly. The area and rate must be above zero. A blank field is refused instead of quietly using a default, and a rate below zero is treated as none. If the defaults feel off for your region, your own numbers always override them.

Using this new home build cost calculator alongside other BuildMetricLab tools

Pair this estimate with the HVAC, insulation and garage conversion cost calculators to price parts of the project, and with the foundation and roofing calculators for quantities. All BuildMetricLab tools run in your browser. Nothing you type is sent anywhere, and every formula is shown on the page so you can audit the maths.

Sources & methodology

Total cost is gross floor area × build rate × (1 + contingency ÷ 100) × (1 + tax ÷ 100). The build rate is an all-in figure per ft² covering labour, materials, equipment and the builder's margin, and excludes land, design fees, finance and landscaping. The page shows it per ft² and the engine holds it per m² (1 m² = 10.7639 ft²), so both unit systems give the same total. Contingency and tax are percentages you enter, and tax applies to the base plus contingency. Area and rate must be above zero, and contingency must be zero or more. A negative tax is treated as zero. The planning tiers in the rate tooltip are examples, not published statistics, and floor area is only one driver of house cost.

Frequently asked questions

Are new home build cost calculator results accurate enough to order materials?

No. The result is a budget, not a materials list or a quote. It multiplies floor area by one all-in rate, so it cannot say what the house is made of or what the site needs. Use it to see whether a project is in reach, then get itemised written quotes from builders.

What build rate should I enter?

Use your builder's quote per square foot (or per square metre on the metric version). The planning tiers are about $165, $250 and $370 per ft² (roughly $1,800, $2,700 and $4,000 per m²). They are examples, not surveyed averages. For context, the National Association of Home Builders' 2024 survey of builders put average construction cost at about $162 per ft², excluding land. Contingency is a separate input on top.

Does this replace professional advice?

No. It is a planning estimator. It does not check the design, structure, site, utilities or permits. A new house needs a licensed contractor or design professional, and your local building department sets the permits and inspections that apply.

Can I change the unit prices?

Yes. The area, build rate, contingency and tax fields are all editable. Enter 0 for contingency or tax to leave them out. The area and rate must be above zero, and a blank field is refused rather than guessed. The estimate excludes land, fees, finance and landscaping.

Spotted something off?

Calculations or display — let us know.

Calculators from other categories that planners often reach for next.