BuildMetricLab

Planning & Budgeting

General Contractor Markup Calculator

Estimates general contractor overhead and profit markup

Updated May 13, 2026 · Live

What this tool does

Estimates a contractor's bid price by applying an overhead percentage to direct cost, then a profit percentage to cost plus overhead. Combined markups are commonly quoted at 15 to 25%, but real figures vary by contractor, trade and region.

Calculates a general contractor's contract price by applying overhead and profit markup percentages to direct project costs.

Inputs
$
%
%
Result

Contractor Bid Price

$61,600.00

Direct Cost
$50,000.00
Overhead (12% of direct cost)
$6,000.00
Profit (10% of cost + overhead)
$5,600.00
Effective Markup
23.2%
Margin on Bid Price
18.8%
Plain Estimate
From BrightScale Labs
Invoice maker
Quote at the door. Signed on the spot.
Estimates and invoices for trades, built while you are still in the room.
Scan to get
Get it onGoogle Play

People also use

Formula Used
T=B⋅(1+o)(1+p)T = B \cdot (1 + o)(1 + p)
TT
Contractor bid price
BB
Base direct cost
oo
Overhead rate (decimal)
pp
Profit rate (decimal)

How the general contractor markup calculator works

The calculator takes a direct cost and adds two layers. Overhead is a percentage of the direct cost. Profit is a percentage of the direct cost plus overhead. The sum is the bid price. It also shows the effective markup on your cost and the margin on the bid price. Every figure is an estimate.

The formula is T = B × (1 + o) × (1 + p), where B is the direct cost and o and p are the overhead and profit rates as decimals. Direct cost means the money spent on the job itself: materials, labour, equipment and subcontractors.

Typical markup and contingency allowances

Combined markups of 15 to 25% are commonly quoted for general contracting, but the real figure depends on the trade, the size of the job, the market and how much risk the contractor carries. Small repair work often carries a higher percentage than a large contract. Treat the range as a sense check, not a rule.

Worked example: a direct cost of 50,000 with 12% overhead and 10% profit. Overhead is 50,000 × 0.12 = 6,000. Profit is (50,000 + 6,000) × 0.10 = 5,600. The bid price is 61,600, an effective markup of 23.2%. A second example: 100,000 at 15% overhead and 10% profit gives 115,000 × 1.10 = 126,500, a 26.5% markup.

Overhead covers the costs of running the business that are not tied to one job: the office, insurance, vehicles, administration and supervision. Some firms recover site-specific items, such as a temporary toilet or a site manager, as direct cost and keep only general overhead in the percentage. Make sure an item is counted once, not in both places, or the bid will be overstated.

Profit is the return for the contractor's risk and capital. It is not the same as take-home pay, because the owner's wages may sit in overhead or in profit depending on how the firm accounts for them. When you compare two quotes, compare the totals first, then the split.

What this tool does not do

It does not replace a professional quote, adjust for local prices, set contingency, or add tax. Sales tax, VAT or GST, bonds, permits and separately charged insurance are outside the result, so add them if your contract includes them.

On-site considerations for general contractor markup

Markup and margin are not the same thing. Markup is measured on cost, margin on the bid price. A 25% markup gives a margin of 20%, because 25 ÷ 125 = 0.20. A contractor who wants a 20% margin therefore needs a 25% markup, not 20%. The calculator shows both so you can compare quotes on the same basis.

Check the contract type too. A fixed price, a cost-plus contract and a time-and-materials contract with a cap share risk differently, and the markup that is fair for each is not the same.

Run the calculator in reverse as a check. If a quote arrives at 61,600 against a direct cost you estimate at 50,000, the effective markup is 23.2%. If you can only account for 45,000 of direct cost, the same quote implies a markup of 36.9%, which is worth a question. Large gaps usually come from scope differences, not from the percentages.

Codes and compliance

This tool prices work and does not check it. Permits, building codes and licensing rules differ by country and region, and structural, gas, electrical and drainage work needs a qualified professional. Public-sector rules can also set how profit is justified, such as FAR 15.404-4 for US federal contracts.

Before you order

Collect at least three written quotes on the same scope and specification, and ask each contractor to show direct cost, overhead and profit separately. Ask whether profit is charged on direct cost alone or on cost plus overhead, because the second convention gives a slightly higher bid. On the default figures the difference is 600 (61,600 against 61,000).

Rates also change with the size of the job. A large contract spreads the same overhead over more direct cost, so its percentage is often lower, while a small job with the same visit and administration costs usually needs a higher one. If a single quote looks unusually high or low, ask what scope and risk it includes.

Adjusting the defaults

Every input is editable. The defaults of 12% overhead and 10% profit are planning values only. Enter your own direct cost and rates and the result recalculates at once. A zero for overhead or profit is valid, and negative or blank entries are rejected rather than guessed.

Using this general contractor markup calculator alongside other BuildMetricLab tools

Use the direct cost from a materials or labour calculator as the starting figure, then apply the markup here. All BuildMetricLab tools run in your browser, so nothing you type is sent anywhere, and every formula is shown on the page so you can check the maths.

Sources & methodology

The tool applies markups in sequence. Overhead = direct cost × overhead %. Profit = (direct cost + overhead) × profit %. The bid price is direct cost + overhead + profit, which equals B × (1 + o) × (1 + p). Effective markup = (bid − direct cost) ÷ direct cost, and margin on the bid price = (bid − direct cost) ÷ bid. Because profit is charged on cost plus overhead, the effective markup is slightly higher than adding the two percentages: 12% and 10% give 23.2%, not 22%. Some contractors add the two percentages instead (22%, bid 61,000 on the default), so confirm which convention a quote uses. Tax, bonds, insurance premiums charged separately, and contingency are not included.

Frequently asked questions

Are general contractor markup calculator results accurate enough to order materials?

The arithmetic is exact for the numbers you enter, but the result is only as good as your direct cost and your overhead and profit rates. Treat it as a planning figure and compare it with written quotes before you sign or order anything.

What wastage percentage should I use?

This tool has no wastage field. Material wastage belongs in your direct cost, and a contingency for unknowns is usually a separate line. What you set here are overhead and profit. The defaults are 12% overhead and 10% profit, which give a bid of 61,600 on a 50,000 direct cost, a 23.2% effective markup. They are planning values, not a standard, so replace them with the contractor's real rates.

Does this replace professional advice?

No. This is a planning estimator. Contract wording, tax treatment and work that affects structure, gas, electrics or drainage need a qualified professional, such as a licensed contractor, accountant or lawyer, as the work requires.

Can I change the unit prices?

Yes. Every field is editable: the direct cost, the overhead percentage and the profit percentage. Enter the figures from your own quote and the bid price and effective markup update at once.

Spotted something off?

Calculations or display — let us know.

Calculators from other categories that planners often reach for next.