Roofing
Soffit & Fascia Calculator
Calculates linear metres of soffit and fascia around the eaves
Updated June 26, 2026 · Live
What this tool does
Calculates the linear length of soffit and fascia needed around the eaves and gable edges, with the soffit panel area as a secondary figure.
Soffit & Fascia Calculator — estimates the linear metres of soffit and fascia around your roofline, plus 5% for corners and offcuts.
People also use
Formula Used
Formula Used
How the soffit & fascia calculator works
The formulas are length = perimeter × 1.05 and soffit area = length × overhang depth. The 5% covers corners and offcuts and is built in, not an input. With the defaults, 40 m (131 ft) of roof edge becomes 40 × 1.05 = 42 m (137.8 ft). At a 400 mm (15.75 in) overhang the soffit panel area is 42 × 0.4 = 16.8 m² (180.8 ft²). At a combined price of $18 a metre the cost is 42 × 18 = $756.00. The tool treats soffit and fascia as one run with one price, so use a combined price per metre.
Measure the roof outline, not the walls. A hip roof on a 10 m × 8 m house with a 0.4 m overhang has an outline of 2 × (10.8 + 8.8) = 39.2 m (128.6 ft), and 39.2 × 1.05 = 41.16 m. For a gable roof, add the rake edges: a rake runs along the rafter, so its length is the half-span divided by the cosine of the pitch, which is 4.4 ÷ cos 30° = 5.08 m for a 4.4 m half-span at 30°.
Soffit and fascia basics
Fascia is the board, or the aluminium, vinyl or PVC cover, that runs along the ends of the rafters at the edge of the roof. It carries the gutter (called an eavestrough in Canada). Soffit is the panel that closes the underside of the overhang between the fascia and the wall. Together they finish the roofline, keep birds, insects and weather out of the roof space, and protect the rafter ends. Rake or barge boards, which finish a gable edge, are fascia in this calculation.
Materials differ in how they age. Painted timber needs repainting and can rot where water gets behind it, which is why the fascia is often capped. Aluminium, vinyl and PVC covers need little upkeep but expand and contract with temperature, so they are fixed to allow movement. Fibre-cement boards are stable but heavy and make silica dust when cut. Whatever the material, the length calculation is the same; the price and the piece length are what change.
Vented vs solid soffit
Many roofs use vented soffit along the eaves so that air can enter the roof space, with solid soffit on porch ceilings and short returns. Vented panels carry a rated net free vent area per metre, shown on the label. Codes set a minimum ventilation area for the attic or roof void, and the rule differs by country and roof type, so work it out with the roof ventilation calculator and the code for your location. In wildfire-prone regions, rules may require ember-resistant mesh or unvented soffit. The tool prices the whole run the same, so enter a price that suits the mix of panels.
What this tool does not do
It estimates one linear run and the panel area, and nothing else. It applies the same length to soffit and fascia, so if soffit runs only under the eaves while fascia also runs up the rakes, run it twice: once with the full outline for fascia and once with the eaves alone for soffit. It does not size attic ventilation, count the trim, J-channel, vents, fasteners or nails, price the gutter, or check that your overhang can carry the soffit. It does not include labour or removal of old boards.
Adjusting the defaults
Every input can be changed. Perimeter, overhang depth and price are the three you control; the 5% allowance is fixed. Fascia and soffit are sold in lengths, commonly around 3 to 4 m (10 to 12 ft), so divide the length by the piece length and round up when you order: 42 ÷ 3 = 14 pieces, or 41.16 ÷ 3.66 (12 ft) = 11.2, so 12 pieces. Price per metre is optional: leave it blank and the cost line disappears. The default price of $18 is a placeholder, not a market figure.
On-site considerations
Roof edges are work at height. In Canada, fall protection rules are set by each province and territory; in Great Britain see HSE roof work, and in the United States see OSHA 1926.501. Soffit and fascia on older buildings can contain asbestos, such as asbestos-cement or insulating-board soffits, so do not cut, drill or break old boards until they have been tested; see HSE asbestos guidance. Run a straight, level fascia first, because it carries the gutter and any sag shows later as standing water. Keep vented soffit clear at the wall so it can draw air. Finish corners with the matching trim, and check the fascia-to-gutter connection with your supplier.
Using this alongside other BuildMetricLab tools
Pair this with the gutter calculator for the gutters that hang on the fascia, the roof ventilation calculator for the intake and exhaust area, and the roof area calculator for the roof itself. In Canada, building rules are in the National Building Code (Codes Canada), as adopted by your province. Everything runs in your browser, nothing is sent anywhere, and the formula is shown so you can check the math. Conversions follow NIST SP 811.
Sources & methodology
Length = perimeter × 1.05, a fixed 5% allowance for corners and offcuts. Soffit area = length × overhang depth. Cost = length × combined price per metre. The perimeter is the roof outline including the overhang (eaves and any rake edges that carry fascia). The same length is used for soffit and fascia, so soffit area is overstated if the run includes rakes with no soffit. A rake length is half-span ÷ cos(pitch). Perimeter and depth must be above zero; a negative price is refused and a blank price hides the cost. Lengths are shown in the unit system of the page (1 m = 3.28084 ft). The tool does not include trim, J-channel, vents, fasteners or labour.
Frequently asked questions
Are soffit & fascia calculator results accurate enough to order materials?
They are accurate to the numbers you enter. The length is your perimeter plus a fixed 5%, and the area is that length times the overhang depth, so measure the roof outline including the overhang. Round up to whole pieces for ordering, and confirm the lengths, trim and vents with your supplier.
What wastage percentage should I use?
There is no wastage input. The tool adds a fixed 5% for corners and offcuts, which suits a simple roof. For a roof with many hips, valleys or short runs, add more when you convert to pieces, because each cut leaves an offcut that may be too short to use.
Does this replace professional advice?
No. This tool is a planning estimator. Soffit ventilation, fire rules and fall protection depend on your location, and old soffits can contain asbestos. For works that affect structure, the National Building Code (NBC), a property line or shared wall, or similar, consult a suitably qualified professional.
Can I change the unit prices?
Yes. The price per metre is editable and should be the combined price of soffit and fascia. Leave it blank to hide the cost line, and enter your supplier quote to get a total that matches your project.
Spotted something off?
Calculations or display — let us know.
Related tools
Calculators from other categories that planners often reach for next.













