BuildMetricLab

Roofing

Roof Area Calculator

Calculates the true sloped roof area from plan size and pitch

Updated October 29, 2026 · Live

What this tool does

Calculates the sloped surface area of a pitched roof from its plan length, plan width and pitch angle, with the slope multiplier and, in US units, roofing squares.

Roof Area Calculator: plan length × plan width ÷ cos(pitch), with the slope multiplier, rafter length and roofing squares.

Inputs
ft
ft
°
Result

Pitched Roof Surface Area (26.57°)

1,252.3 ft²

Plan Area
1,120.0 ft²
Slope Multiplier
1.118×
Roofing Squares (100 ft²)
12.52
Rafter Length (gable, ridge along length)
15.65 ft

Diagram

28 ft26.57°
Plain Estimate
From BrightScale Labs
Invoice maker
Quote at the door. Signed on the spot.
Estimates and invoices for trades, built while you are still in the room.
Scan to get
Get it onGoogle Play

People also use

Formula Used
A=L⋅Wcos⁡θA = \frac{L \cdot W}{\cos\theta}
AA
Pitched-roof surface area
LL
Plan length, to the eaves edge
WW
Plan width, to the eaves edge
θ\theta
Roof pitch angle

How the roof area calculator works

Roof area = plan length × plan width ÷ cos(pitch). Enter the length and width of the roof as seen from above and the pitch in degrees, and the calculator returns the true sloped area, the plan area, the slope multiplier (1 ÷ cos θ) and, on the US side, the number of roofing squares. A roof tilted at an angle is bigger than the ground it covers, and the multiplier is how much bigger. With the US defaults, 40 × 28 ft at 26.57° (a 6 in 12 pitch) is 1,120 ft² of plan, a multiplier of 1.118 and a roof of about 1,252 ft² (116 m²), or 12.5 squares. On the metric side the defaults are 10 × 6 m at 30°: 60 m² of plan, a multiplier of 1.155 and 69.3 m² (746 ft²) of roof.

The same formula holds for a gable and for a hip roof, as long as every face has the same pitch. A hip roof has the same sloped area as a gable over the same footprint, even though it looks smaller. It does not hold when parts of the roof have different pitches, or for dormers and valleys with their own geometry: split the roof into rectangles, work out each at its own pitch, and add them up.

Typical roofing wastage

The tool returns net roof area and adds no wastage. Roofing material is cut to fit at the ridge, hips, valleys and edges, and the offcuts cannot all be reused. Allowances commonly quoted are about 10 percent for a simple gable and 12 to 15 percent for a hip roof or one with several valleys; check the supplier's guidance for the product. On 1,252 ft² that is 1,377 ft² at 10 percent (13.8 squares, so order 14) and 1,440 ft² at 15 percent (14.4 squares). On the metric roof of 69.3 m², 10 percent is 76.2 m². Shingles are sold in bundles, usually three to a square, and slates and tiles by the piece, so the count always rounds up.

What this tool does not do

It treats the roof as a single rectangle of uniform pitch. It cannot see dormers, chimneys, skylights, or valleys, and it does not subtract openings; roofing material is normally ordered over small openings anyway. It does not add the eaves and verge overhang unless you include it in the plan dimensions, does not add wastage, and does not choose underlay, battens, flashings or fixings. The rafter length shown is for a gable with its ridge running along the length of the plan, measured to the line of the eaves and not including overhang.

On-site considerations for roof area

Measure the plan from the outer edge of the eaves, not the walls, because the roof covering extends past the wall on every side. A 40 × 28 ft house with 1 ft of overhang all round has a 42 × 30 ft roof plan: 1,260 ft² and, at 26.57°, about 1,409 ft², 157 ft² more than the wall dimensions give. If you only know the pitch as a ratio, convert it: 4 in 12 is 18.43° and a multiplier of 1.054, 6 in 12 is 26.57° and 1.118, 8 in 12 is 33.69° and 1.202, and 12 in 12 is 45° and 1.414. A pitch in degrees can also be measured with a digital level on a rafter. Work on a roof carries a fall risk, and slate, tile and wet surfaces make it worse.

Codes and compliance

Working at height is regulated. In the United States, OSHA 1926.501 requires fall protection for residential construction at 6 ft (1.8 m) above a lower level. In Great Britain the Work at Height Regulations 2005 apply, and HSE publishes guidance on roof work. Roof coverings, underlay and ventilation are governed by local building codes, such as the International Residential Code in the United States and Approved Document B (fire) and British Standards such as BS 5534 for slating and tiling in England. The calculator does not check any of them. Structural changes to a roof, including new openings and a change of covering that alters its weight, need a chartered or licensed structural engineer.

Before you order

Add your wastage to the net area, convert to the unit the supplier sells in, and round up. Confirm the exposure or coverage per bundle, tile or slate with the product data, because coverage differs between products. Order shingles from one production batch so colour is consistent, and keep a spare bundle for repairs. Compare at least two quotes on the same area and specification.

Adjusting the defaults

Every field is editable and the result updates as you type. Plan length and width must be above zero and the pitch must be at least 0° and under 90°; the slider limits are 5° to 75°. Switching units converts the typed values, so 40 ft becomes 12.19 m, and the number of roofing squares appears on the US side. A flat roof (0°) returns the plan area.

Using this roof area calculator alongside other BuildMetricLab tools

The roof pitch calculator converts between ratio and degrees and gives rafter lengths, the gutter calculator sizes the drainage, and the furring strip calculator covers battens. Every BuildMetricLab tool runs in your browser, with no sign-up and no data sent anywhere, and the formula is shown on the page so the maths can be checked.

Sources & methodology

Roof area = L × W ÷ cos θ, where L and W are the plan length and width and θ the pitch from horizontal. This is the same as plan area × √(rise² + run²) ÷ run, the roofer's pitch multiplier (6 in 12 gives 1.118). It is exact for a gable or a hip roof whose faces share one pitch; roofs with mixed pitches, dormers or valleys should be split into rectangles and summed. Squares are area ÷ 100 ft² (9.290304 m²). The rafter length shown is for a gable with the ridge along the length: width ÷ 2 × 1 ÷ cos θ, excluding overhang. Plan dimensions must be above zero, the pitch at least 0° and under 90°, and blank or invalid entries are refused. No wastage is added.

Frequently asked questions

Are roof area calculator results accurate enough to order materials?

They give the net sloped area of a simple roof accurately: plan area ÷ cos(pitch) is exact geometry. Ordering needs more: include the eaves overhang in the plan, add wastage (about 10 percent for a simple gable and more for hips and valleys), split roofs with different pitches or dormers into sections, and confirm coverage per bundle or tile with the supplier.

What wastage percentage should I use?

The tool does not add wastage, so you add it to the result. Commonly quoted allowances are about 10 percent for a simple gable roof and 12 to 15 percent for hip roofs and roofs with several valleys; complex cuts, steep pitches and first-time work justify more. Check the product maker's guidance. For example, 1,252 ft² with 10 percent is 1,377 ft², or 14 squares once rounded up.

Does this replace professional advice?

No. It is a planning estimator. Roof work carries a serious fall risk and is regulated: the roofer must follow fall-protection rules such as OSHA 1926.501 in the United States or the Work at Height Regulations 2005 in Great Britain. Structural changes to a roof need a chartered or licensed structural engineer, and the final quantity should be confirmed by a roofing contractor.

Can I change the unit prices?

This calculator has no price field because it returns area only. Multiply the area, plus wastage, by your supplier's price per square, per square foot or per square metre to get a cost. Enter prices exactly as quoted and check whether they include tax.

Spotted something off?

Calculations or display — let us know.

Calculators from other categories that planners often reach for next.