BuildMetricLab

Wall & Ceiling

Paint Calculator

Gallons of paint, cans and cost from wall area, coats and coverage

Updated May 13, 2026 · Live

What this tool does

Estimates the gallons of paint, the number of cans and the cost for walls or ceilings from the area, the number of coats and the coverage on the label.

Estimates gallons of paint, the number of cans and the cost from the wall area, the number of coats and the coverage rate.

Inputs
ft²
ft²/gal
gal
$
Result

Paint Required

2.29 gal

Area
400.0 ft²
Coats
2
Coverage Used
350 ft²/gal (8.6 m²/L)
1.00 gal Cans
3
Bought (with the part can)
3.00 gal (11.4 L)
Estimated Cost
$114.00
Price it on PlainEstimate

Opens these materials as a new estimate on PlainEstimate, our free estimate and invoice app.

Plain Estimate
From BrightScale Labs
Invoice maker
Quote at the door. Signed on the spot.
Estimates and invoices for trades, built while you are still in the room.
Scan to get
Get it onGoogle Play

People also use

Formula Used
L=A⋅cr,cans=⌈L÷S⌉L = \frac{A \cdot c}{r},\quad \text{cans} = \lceil L \div S \rceil
LL
Paint volume required
AA
Area to paint
cc
Number of coats
rr
Coverage rate (area per unit volume)
SS
Size of one can

How the paint calculator works

Paint is sold by the can and spread by the area, so the amount you need is the area to cover times the number of coats, divided by what one gallon covers. This calculator takes the wall area, the coats and the coverage rate printed on the can, gives the gallons, and rounds up to whole cans. The formula is L = A × c ÷ r, with cans = ⌈L ÷ S⌉ for a can size S. The cost is the can count times the price. The page works in ft², ft²/gal and gallons, and converts internally, so the metric and US-unit versions of the same job agree.

Example with the defaults on this page: 400 ft² of wall at two coats and 350 ft² per gallon needs 400 × 2 ÷ 350 = 2.29 gal. With 1 gal cans that is 3 cans, and at $38 a can the cost is $114. You buy 3 gal, which leaves 0.71 gal for touch-ups. In metric, 400 ft² is 37.2 m², 350 ft²/gal is 8.6 m²/L and 2.29 gal is 8.65 L.

A whole room: a 12 × 14 ft room with 8 ft ceilings has a wall perimeter of 52 ft, so 52 × 8 = 416 ft². Take off a door of 3 × 7 ft (21 ft²) and two 3 × 4 ft windows (24 ft²) and the wall area is 371 ft². Two coats at 350 ft²/gal need 371 × 2 ÷ 350 = 2.12 gal, which is 3 cans. The 168 ft² ceiling at two coats needs another 0.96 gal. A large exterior of 1,800 ft² at 300 ft²/gal and two coats needs 12.00 gal exactly, which is 12 one-gallon cans or about $456.

Typical US wall and ceiling wastage

The tool has no wastage percentage, because the margin lives in the coverage rate. The coverage on a label is for a smooth, sealed surface under good conditions. Rough, porous or unprimed surfaces soak up more, and cutting in around edges, sockets and trim uses more than the flat figure implies. If your walls are rough or new, enter a coverage below the label's, for example 300 instead of 350 ft²/gal, and the gallons rise by about 17%. These are rules of thumb, not published standards.

Rounding up to whole cans is an allowance of its own. In the first example 3 cans hold 0.71 gal more than the 2.29 gal needed, which is about 31% extra. Keep that for touch-ups, because a later batch of tinted paint may not match exactly. If the extra is large you can buy 2 gallons and a quart instead, which the can size field allows.

What this tool does not do

It does not size primer, which is a separate product with its own coverage. Run the tool again with the primer's coverage and one coat. It does not deduct doors and windows for you, so subtract them when you enter the area. It does not choose a paint type or sheen, cost brushes, rollers, tape or sheeting, or estimate labour. It treats the whole area as one surface, so walls, ceiling and trim need separate runs where the paint or coverage differs.

On-site considerations for paint

Preparation decides how well paint covers. Wash grease and dust off the surface, fill and sand holes, and prime bare drywall, patched areas and stains, because new drywall soaks up the first coat unevenly. A strong colour change, such as dark to light, often needs a primer or an extra coat. Coverage also falls on textured walls, which have more surface than their flat area.

Paint releases volatile organic compounds as it dries, and the US EPA advises good ventilation during and after painting. Work in a ventilated room, follow the label, and allow the recoat time it states. Mix cans of the same colour together in one larger container before you start, so that slight differences between batches do not show as a change across a wall.

Codes and compliance

Painting does not normally need a permit, but disturbing old paint can. In the United States many homes built before 1978 contain lead-based paint, and the EPA's Renovation, Repair and Painting rule requires lead-safe practices and certified renovators for work that disturbs paint in many of those homes when paid contractors do it. The WHO notes that lead in paint is a hazard to children worldwide. Test old paint before you sand or scrape, and do not dry-sand it. Other countries have their own rules, so follow the ones where you live.

Before you order

Measure each wall and ceiling, subtract the large openings, and note the coats and the surface. Check the coverage on the label of the exact product, because it differs by type: ceiling paint, primer and gloss all cover differently. Compare the price per gallon, not the price per can, because can sizes differ, and a 5 gal pail is usually cheaper per gallon for a large job. Buy a little extra for the same batch, and keep the leftover can sealed and labelled with the room and colour.

Adjusting the defaults

Every input is editable. The area, coverage and can size must be above zero, and the coats must be a whole number of 1 or more. A blank or zero field is refused instead of silently using a default, and a blank price hides the cost line. If your paint's label gives coverage in square metres per litre, multiply by 40.7 to convert it to ft²/gal, or switch to the metric inputs.

Using this paint calculator alongside other BuildMetricLab tools

Pair this estimate with the drywall and joint compound calculators for the surface under the paint, and with the wallpaper and flooring calculators for the rest of a room. All BuildMetricLab tools run in your browser. Nothing you type is sent anywhere, and every formula is shown on the page so you can audit the maths.

Sources & methodology

Paint volume = area × coats ÷ coverage per coat, and containers = volume ÷ container size, rounded up to a whole can or tin. The page takes the area in ft², the coverage in ft² per gallon and the can in gallons, and converts them (1 ft² = 0.0929 m², 1 gal = 3.785 L; 350 ft²/gal is 8.6 m²/L) so both unit systems agree. Cost = containers × price, hidden if no price is entered. The area, coverage and size must be above zero, the coats a whole number of 1 or more, and the price zero or more. The coverage you enter is the practical spread rate for one coat on your surface, so the tool adds no separate wastage; the part can or tin left over is shown. Manufacturers' stated coverage is for smooth, sealed surfaces, and rough or unprimed surfaces take more. The tool does not size primer separately, and does not deduct openings, which you do when you enter the area.

Frequently asked questions

Are paint calculator results accurate enough to order materials?

They are a good starting quantity. The paint needed is the area times the coats divided by the coverage, and cans are rounded up. Real use depends on the surface, how porous it is, the colour change, and your technique, so check the plan against the label's coverage and add a margin if the walls are rough or unprimed.

Does this calculator account for paint wastage or extra coats?

It has no separate wastage percentage, but it counts coats exactly. Raise the number of coats for a big colour change or a porous surface. To build in a margin for cutting in, rough walls or spillage, enter a lower coverage than the label states. Rounding up to whole cans adds a further allowance, and the leftover paint is useful for touch-ups.

Does this replace professional advice?

No. It estimates paint quantity and cost only. It does not choose a paint, check the surface or decide what preparation is needed. For work that disturbs paint in older homes, which may contain lead, follow the rules where you live and consult a qualified professional.

Can I change the unit prices?

Yes. The price per can is editable, and a blank price hides the cost line so only the quantity shows. A price of zero is accepted. The area, coverage and can size must be above zero, and the coats must be a whole number of 1 or more.

Spotted something off?

Calculations or display — let us know.

Calculators from other categories that planners often reach for next.