BuildMetricLab

Surveying & Mapping

Area from Coordinates Calculator

Calculates land area from corner coordinates using the Shoelace formula

Updated October 13, 2026 · Live

What this tool does

Calculates the area, perimeter and side lengths of a four-corner plot from its (x, y) coordinates in metres or feet using the Shoelace formula, with the equivalent in hectares and acres.

Enter the four corner coordinates of a plot in order, in metres or feet, to get its area, perimeter and side lengths from the Shoelace formula, with the equivalent in hectares and acres.

Inputs
ft
ft
ft
ft
ft
ft
ft
ft
Result

Polygon Area (4 vertices)

858.0 ft²

Perimeter
118.00 ft
Side Lengths
1–2: 33.00 ft, 2–3: 26.00 ft, 3–4: 33.00 ft, 4–1: 26.00 ft
Hectares
0.00797 ha
Acres
0.0197 ac
Corner Order
Anticlockwise (positive shoelace sum)
Method
Shoelace formula (Gauss area), exact for the coordinates entered
Plain Estimate
From BrightScale Labs
Invoice maker
Quote at the door. Signed on the spot.
Estimates and invoices for trades, built while you are still in the room.
Scan to get
Get it onGoogle Play

People also use

Formula Used
A=12∣∑(xi⋅yi+1−xi+1⋅yi)∣A = \frac{1}{2} \left| \sum (x_i \cdot y_{i+1} - x_{i+1} \cdot y_i) \right|
AA
Polygon area
xix_i
Easting of corner i (projected grid, feet)
yiy_i
Northing of corner i (projected grid, feet)

How the area from coordinates calculator works

Give it the corners of a plot as (x, y) pairs, in order around the boundary, and it returns the enclosed area, the perimeter, the length of each side and the equivalent in hectares and acres. The maths is the Shoelace formula, also called Gauss's area formula: A = ½ |Σ (xᵢ·yᵢ₊₁ − xᵢ₊₁·yᵢ)|, the half-sum of the cross-products of each corner with the next, the last corner pairing with the first. It is exact for any polygon whose boundary does not cross itself, which is why surveyors have used it on coordinate lists for two centuries. On the US side the coordinates are in feet and the result in square feet; on the metric side they are in metres and the result in square metres. There is no rate, no price and no wastage anywhere in this tool, only geometry.

The Shoelace formula and a worked example

Take the US default corners, (0, 0), (33, 0), (33, 26) and (0, 26) feet, a plain rectangle. Pair each with the next: (0×0 − 33×0) + (33×26 − 33×0) + (33×26 − 0×26) + (0×0 − 0×26) = 0 + 858 + 858 + 0 = 1,716, and half of that is 858 ft² (79.7 m²), which is 33 × 26 as it should be. The perimeter is 118 ft (36.0 m) and the area is 0.0197 acres. The metric default is an irregular four-sided plot at (0, 0), (12, 0), (15, 7) and (5, 9) metres: the cross-products come to (0 − 0) + (84 − 0) + (135 − 35) + (0 − 0) = 184, so the area is 92 m² (990 ft²), with a perimeter of 40.1 m (131.6 ft) from sides of 12, 7.6, 10.2 and 10.3 m. A square 660 ft on a side gives 435,600 ft², which is exactly 10 acres, because an acre is 43,560 ft², ten square chains of 66 ft; and 100 m square is one hectare, 2.47 acres. The acre used here is the international one, 4,046.8564224 m², the figure NIST adopted when the US survey foot was retired at the end of 2022.

The sign of the raw sum tells you which way round you went: positive for anticlockwise, negative for clockwise, as MathWorld's Polygon Area entry puts it, and the absolute value makes the area the same either way. The calculator reports the direction so you can check it against the plan.

What this tool does not do

It does not convert latitude and longitude to a grid, change between coordinate systems or datums, or settle where a legal boundary lies. It does not accept a boundary that crosses itself: a corner list in the wrong order describes a bowtie, and for that shape the formula returns the difference between the two lobes rather than the ground inside them. The corners (0, 0), (10, 10), (10, 0) and (0, 5) metres are a case in point: the formula gives 25 m² for a figure whose two triangles actually cover 41.7 m² between them, so the calculator checks every pair of non-adjacent sides and refuses the input instead. Repeated or collinear points, which enclose nothing, are refused too. And it takes four corners on this page, so a plot with more sides is split into four-sided pieces and triangles whose areas add up.

On-site considerations for area from coordinates

The arithmetic is exact, so the only error in the area is the error in the coordinates. The US government's GPS performance page puts a GPS-enabled smartphone at about 4.9 m (16 ft) under open sky, and worse near buildings and trees. On a small plot that is not a rounding error: the sides of the 12 by 9 m default plot are 7.6 to 12 m long, so a 4.9 m slip at each corner is nearly half a side, and the area could come out at a fraction of the true figure or at double it. Survey-grade RTK GNSS brings a point to a few centimetres and a total station run from known control to millimetres, which is the difference between a rough idea of a garden and a figure you would put on a transfer. Walk the boundary in one direction when you collect the points, note which corner is which, and read the coordinates in the same grid for every corner; a mix of two grids or two datums puts the corners on different maps.

Coordinate systems, datums and accuracy

The formula needs projected coordinates, an easting and a northing on a flat grid where one unit is one metre or one foot in both directions. Great Britain's National Grid, UTM zones, the US State Plane zones and Australia's MGA on the GDA2020 datum all work; Ordnance Survey's guide to coordinate systems explains how eastings and northings relate to latitude and longitude and why a point does not have a single, unique pair of each. Degrees of latitude and longitude do not work directly, because a degree of longitude is shorter than a degree of latitude and shrinks towards the poles, so the cross-products of raw degrees give a meaningless number. Convert geographic coordinates to a projected grid first. The grid itself introduces a small scale factor against true ground distance, within about one part in a thousand on the standard projections, which matters for a cadastral survey and not for a planning estimate.

Before you rely on the figure

For a sense of how big a plot is from map or GPS coordinates, this calculation is enough. For anything that turns on the exact area or the exact line, a land transfer, a boundary dispute, a subdivision, a planning or zoning submission with a site-area threshold, the definitive figure comes from a measured survey by a licensed or registered surveyor, set against the title and the physical boundary features. Plan drawings, assessor maps and online mapping are convenient and are not survey-accurate, and the professional's title and the regulator differ by country: a Professional Land Surveyor in the US, a chartered surveyor registered with RICS in the UK, a registered or licensed cadastral surveyor in Australia and Canada.

Adjusting the defaults

Every coordinate is editable and the result updates as you type. Replace the defaults with your own corners in order, clockwise or anticlockwise, and leave a corner blank only in pairs: a corner with an X and no Y is refused rather than dropped, so a three-sided plot is three complete pairs and an empty fourth. Large grid coordinates work as they are; the formula only ever uses differences, so a plot at easting 530,000 and northing 180,000 computes as precisely as one at the origin. The unit switch above the inputs converts the defaults between feet and metres, and the side lengths let you check each edge against a measured distance before trusting the area.

Using this area from coordinates calculator alongside other BuildMetricLab tools

The bearing and distance calculator turns the same coordinates into the bearing and length of each side for setting out, the contour interval calculator handles the levels on the same site, and once the area is known the fence calculator takes the perimeter for the boundary run. Every BuildMetricLab tool runs entirely in your browser, nothing you type is sent anywhere, and the formula is shown on the page so the maths can be audited.

Sources & methodology

Area A = ½ |Σ (xᵢ·yᵢ₊₁ − xᵢ₊₁·yᵢ)| over the corners entered in sequence, the last pairing with the first (the Shoelace or Gauss area formula, exact for a polygon whose boundary does not cross itself; MathWorld, Polygon Area). The sign of the raw sum is positive for anticlockwise order and negative for clockwise, and is reported. Perimeter and side lengths are the Euclidean distances between consecutive corners. Coordinates must be projected eastings and northings on a flat grid (metres on the metric side, feet on the US side, converted at 0.3048 m per foot before the calculation); latitude and longitude in degrees are not valid input. A corner with only one coordinate is refused, as are fewer than three corners, repeated or collinear corners that enclose no area, and a boundary whose non-adjacent sides intersect. Hectares = area ÷ 10,000; acres = area ÷ 4,046.8564224 m² (the international acre of 43,560 ft² at 0.3048 m per foot, per NIST's revised conversion factors), both to three significant figures.

Frequently asked questions

Are area from coordinates calculator results accurate enough to order materials?

The area is exact for the coordinates you enter: the Shoelace formula has no approximation in it. What limits the figure is the coordinates themselves. Points read from a phone GPS are good to about 4.9 m (16 ft) under open sky by the US government's published performance figure, which on a small plot can change the area by a large fraction; survey-grade GNSS reaches centimetres and a total station millimetres. For ordering turf, paving or fencing on a plot measured with a tape or a survey-grade instrument the figure is fine; from phone coordinates it is a rough size, not an order quantity.

Do the coordinates need to be entered in a particular order?

Yes. Enter the corners in sequence around the boundary, clockwise or anticlockwise; the formula joins each corner to the next and the last back to the first. A jumbled order describes a boundary that crosses itself, and for that shape the formula returns the difference between the two lobes, not the ground inside them, so the calculator checks every pair of non-adjacent sides and refuses a crossed boundary rather than reporting a wrong area. The result shows whether your order ran clockwise or anticlockwise.

Does this replace professional advice?

No. It is a geometric calculation for planning and education. Where the exact area or the exact boundary line matters, a land transfer, a subdivision, a boundary dispute or a planning submission with a site-area threshold, the definitive figure comes from a measured survey by a licensed or registered surveyor set against the legal title, and the coordinate system, datum and legal boundary rules differ by country. For any work that touches structure, gas, electrics or drainage, consult the relevant qualified professional.

Can I change the unit prices?

There are no prices in this tool: it is pure geometry, with no rate, cost or wastage field. The eight coordinates are the only inputs, and all of them are editable. To put a price on what the area implies, carry the figure into the fencing, turf or paving calculators, which take a rate per unit area or length.

Spotted something off?

Calculations or display — let us know.

Calculators from other categories that planners often reach for next.