Project Cost Estimators
Roof Replacement Cost Calculator
Roof replacement cost from sloped roof area, build rate, contingency and tax
Updated May 13, 2026 · Live
What this tool does
Estimates the cost of replacing a roof as the sloped roof area times an all-in build rate, plus a contingency and any sales tax.
Estimates a planning-level roof replacement cost from the sloped roof area, an all-in build rate, a contingency and an optional sales tax.
People also use
Formula Used
Formula Used
How the roof replacement cost calculator works
A roof replacement is priced by the area of roof surface. This calculator gives a budget in one line: sloped roof area × build rate, plus a contingency, plus any sales tax. It works in square feet here and in square metres on the metric version, and the two give the same total.
The formula is C = A × r × (1 + g ÷ 100) × (1 + t ÷ 100), where A is the sloped roof area, r the all-in rate per unit area, g the contingency percentage and t the tax percentage. Tax applies to the base cost plus contingency.
Example with the defaults on this page: 860 ft² of sloped roof at $19 per ft² is $16,340. A 10% contingency adds $1,634, giving $17,974, and there is no tax line at the default 0%. With a 6% sales tax on top the total is $17,974 × 1.06 = $19,052.44. Roofers price by the square, which is 100 ft²: 860 ft² is 8.6 squares, and $19 per ft² is $1,900 per square. In metric, 860 ft² is 79.9 m².
The tier changes the answer a lot. The same 860 ft² at the budget rate of $12 comes to $10,320, or $11,352 with contingency. At the premium rate of $28 it is $24,080, or $26,488 with contingency. Roof area is not the footprint. A 6:12 roof over an 800 ft² footprint has about 800 × 1.118 = 894 ft² of surface, before overhangs, hips and valleys.
What the build rate covers
The build rate is an all-in figure per unit of roof area: stripping the old covering, new underlayment, flashings, the new covering, labour and the contractor's overhead and margin. It does not normally cover repairs to the decking or rafters, new gutters, chimney work, skylights or rooflights, or permit fees, so ask what each quote includes. The covering is the biggest driver: asphalt shingles, metal, slate and tile differ a great deal in price.
The planning tiers in the tooltip are about $12, $19 and $28 per ft² for budget, mid and premium work. They are examples chosen to bracket a range, not published statistics, and regional variation is large. Replace them with a quote. The contingency then sits on top to absorb costs that only appear once the old roof is off.
What this tool does not do
It does not measure the roof. You enter the sloped area, which you can work out from the plan area and the pitch with the roof area and roof pitch calculators. It does not price the covering by type, decking or timber repairs, gutters, chimneys or skylights separately, and it does not produce a materials list. It is not a substitute for a quote, and it does not check that the covering suits the pitch.
On-site considerations for roof replacement cost
What is under the old roof decides the budget. Rotten decking or timbers found once the covering is off are the usual reason for extra cost, so a 10 to 15% contingency is common. Many older US roofs have two layers of shingles, and some codes limit the number of layers, so a tear-off may be required. In hot climates, a light-coloured or reflective roof can reduce heat gain, and the EPA's heat island pages explain the trade-offs, so decide on the covering before you ask for quotes. The pitch, the number of valleys, hips and penetrations, the height of the building and access for materials all add labour, and a steep or complex roof costs more per unit of area than a simple one.
Weather and timing matter. A roof should be stripped and covered in sections so the building is never left open, and work needs a dry spell. Check that the roofer has insurance, a safe way to work at height and a plan for protecting the property. Working on a roof is dangerous, and HSE guidance in Great Britain and OSHA rules in the United States cover fall protection.
Codes and compliance
In the United States a roof replacement normally needs a building permit, and the International Residential Code and local amendments set the rules for decking, underlayment, flashing and the number of layers. Sales tax on materials and labour varies by state, so the tax field defaults to 0. A permit or approval is separate from the cost of the work, so ask your building department what applies, and what it costs. Other countries have their own rules, so follow the ones where you build.
Before you order
Break your budget into the roofing cost, any decking or timber repairs, gutters and fascias, permit fees and contingency from the outset. Get at least three written, itemised quotes and compare what each includes: the covering and its warranty, the underlayment, flashings, ventilation, repairs, the removal of the old roof and the clean-up. Ask about the roofer's insurance and workmanship guarantee. Once you have quotes, replace the default rate with the lowest you trust and the highest you have seen to bracket the range.
Adjusting the defaults
Every input is editable. Enter the sloped area, the build rate, the contingency and the tax rate and the output recalculates instantly. The area and rate must be above zero. A blank field is refused instead of quietly using a default, and a rate below zero is treated as none. If the defaults feel off for your region, your own numbers always override them.
Using this roof replacement cost calculator alongside other BuildMetricLab tools
Pair this estimate with the roof area and roof pitch calculators to get the sloped area, and with the underlayment and batten calculators for quantities. All BuildMetricLab tools run in your browser. Nothing you type is sent anywhere, and every formula is shown on the page so you can audit the maths.
Sources & methodology
Total cost is sloped roof area × build rate × (1 + contingency ÷ 100) × (1 + tax ÷ 100). The build rate is an all-in figure per ft² covering tear-off, underlayment, flashing, covering, labour and the contractor's margin; the page shows it per ft² and the engine holds it per m² (1 m² = 10.7639 ft²), so both unit systems give the same total. Contingency and tax are percentages you enter, and tax applies to the base plus contingency. Area and rate must be above zero, and contingency must be zero or more. A negative tax is treated as zero. The area is the sloped surface of the roof, not the footprint, and the planning tiers in the rate tooltip are examples, not published statistics. The tool does not price decking repairs, gutters, chimneys or skylights separately.
- NRCA — National Roofing Contractors Association: roofing guidance and finding a roofer (US)
- ICC — International Residential Code: roof assemblies and re-roofing (US)
- US EPA — Heat island effect: cool roofs and roofing choices (US)
- NIST — Special Publication 811, Guide for the Use of the International System of Units (ft² and m²)
Frequently asked questions
Are roof replacement cost calculator results accurate enough to order materials?
No. The result is a budget, not a materials list or a quote. It multiplies the sloped roof area by one all-in rate, so it cannot say how many bundles or squares to buy. Enter the sloped area, not the footprint: plan area × slope factor, which is 1.118 for a 6:12 roof. Use the result to judge the cost, then get itemised written quotes.
What build rate should I enter?
Use your roofer's quote per square foot (or per square, which is 100 ft²). The planning tiers are about $12, $19 and $28 per ft² (roughly $1,200, $1,900 and $2,800 per square, or $130, $200 and $300 per m²). They are examples, not surveyed averages. Cost depends on the covering, the pitch, the number of layers to strip and the decking repairs, and a quote beats the tiers. Contingency is a separate input on top.
Does this replace professional advice?
No. It is a planning estimator. It does not inspect the roof, check the decking, or tell you whether the covering suits the pitch. For roof structure and any work that disturbs old materials, consult a licensed contractor, and follow your local building department's rules on permits.
Can I change the unit prices?
Yes. The area, build rate, contingency and tax fields are all editable. Enter 0 for contingency or tax to leave them out. The area and rate must be above zero, and a blank field is refused rather than guessed.
Spotted something off?
Calculations or display — let us know.
Related tools
Calculators from other categories that planners often reach for next.













