Project Cost Estimators
Kitchen Remodel Cost Calculator
Kitchen remodel cost from area, build rate, contingency and tax
Updated May 13, 2026 · Live
What this tool does
Estimates the cost of a kitchen remodel as the floor area times an all-in build rate, plus a contingency and any sales tax.
Estimates a planning-level kitchen remodel cost from the floor area, an all-in build rate, a contingency and an optional sales tax.
People also use
Formula Used
Formula Used
How the kitchen remodel cost calculator works
A kitchen remodel is far more than floor area, because the cost is driven by the cabinets or units, the worktops, the appliances and how much the layout changes. This calculator gives a budget in one line: floor area × build rate, plus a contingency, plus any sales tax. It works in square feet here and in square metres on the metric version, and the two give the same total.
The formula is C = A × r × (1 + g ÷ 100) × (1 + t ÷ 100), where A is the floor area, r the all-in rate per unit area, g the contingency percentage and t the tax percentage. Tax applies to the base cost plus contingency.
Example with the defaults on this page: 130 ft² at $325 per ft² is $42,250. A 10% contingency adds $4,225, giving $46,475, and there is no tax line at the default 0%. With an 8% sales tax on top the total is $46,475 × 1.08 = $50,193. In metric, 130 ft² is 12.08 m² and $325 per ft² is about $3,498 per m², so the same job is 12.08 × $3,498 = $42,250 again.
The tier changes the answer a lot. The same 130 ft² at the budget rate of $165 comes to $21,450, or $23,595 with contingency. At the premium rate of $555 it is $72,150, or $79,365 with contingency. That is a spread of more than three to one, which is why a contractor's quote matters more than the default.
What the build rate covers
The build rate is an all-in figure per unit of floor area: cabinets, worktops, appliances, plumbing and electrical work, flooring, labour and the contractor's overhead and margin. Ask whether a quote includes each of those, because quotes that leave out appliances, demolition or disposal look cheaper than they are. Floor area is a crude driver of kitchen cost, so a small kitchen with premium finishes can cost more per ft² than a large plain one, and the rate is the number to adjust.
The planning tiers in the tooltip are about $165, $325 and $555 per ft² for budget, mid and premium work. They are examples chosen to bracket a range, not published statistics, and regional variation is large. Replace them with a quote. The contingency then sits on top to absorb costs that only appear once the old kitchen is stripped out.
What this tool does not do
It does not produce a unit or appliance list, so it cannot say what to buy. It does not check the layout, ventilation, gas, electrics or plumbing, and it does not include design fees, permit fees or the cost of living elsewhere, or eating out, while the work is done. It is not a substitute for a quote, and it does not confirm that the work is allowed.
On-site considerations for kitchen remodel cost
The biggest price swings come from moving things. Keeping the sink, hob and appliances where they are is the cheapest route. Moving plumbing, a gas supply or the extraction route adds trade work, and opening up a wall adds structure and making good. Check what is behind the walls and floors, because old wiring, damp or hidden pipes are the usual sources of extra cost. In the United States, the EPA's Renovation, Repair and Painting rule applies to work that disturbs paint in homes built before 1978, because many contain lead-based paint, and a certified renovator must follow lead-safe practices.
Lead times matter as much as cost. Custom cabinets and some appliances take weeks to arrive, and a kitchen cannot be finished until the last item is on site. Set a date for ordering and keep the old kitchen working until the new one is ready to be fitted.
Codes and compliance
In the United States a remodel normally needs a permit, with inspections for electrical, plumbing and gas work, and the rules come from state and local codes based on the National Electrical Code and the International Residential Code. Sales tax on materials and labour varies by state, so the tax field defaults to 0. The layout and clearances follow planning guidance such as the NKBA's kitchen guidelines. Rules differ in other countries.
Before you order
Break your budget into build cost, design fees and contingency from the outset. Contingency of 10 to 20% is a planning habit on renovation work, not a published standard, and an older house or a changed layout sits at the top. Get at least three written, itemised quotes and compare what each includes. Once you have quotes, replace the default rate with the lowest you trust and the highest you have seen to bracket the range.
Adjusting the defaults
Every input is editable. Enter your own area, build rate, contingency and tax rate and the output recalculates instantly. The area and rate must be above zero. A blank field is refused instead of quietly using a default, and a rate below zero is treated as none. If the defaults feel off for your region, your own numbers always override them.
Using this kitchen remodel cost calculator alongside other BuildMetricLab tools
Pair this estimate with the bathroom remodel and room renovation calculators to cost a larger project, and with the flooring and countertop calculators for quantities. All BuildMetricLab tools run in your browser. Nothing you type is sent anywhere, and every formula is shown on the page so you can audit the maths.
Sources & methodology
Total cost is floor area × build rate × (1 + contingency ÷ 100) × (1 + tax ÷ 100). The build rate is an all-in figure per ft² covering labour, materials, appliances and the contractor's margin; the page shows it per ft² and the engine holds it per m² (1 m² = 10.7639 ft²), so both unit systems give the same total. Contingency and tax are percentages you enter, and tax applies to the base plus contingency. Area and rate must be above zero, and contingency must be zero or more. A negative tax is treated as zero. The planning tiers in the rate tooltip are examples, not published statistics, and floor area is a crude driver of kitchen cost.
- NKBA — Kitchen planning guidelines: layout, clearances and ventilation (US)
- US EPA — Lead Renovation, Repair and Painting Program, for homes built before 1978 (US)
- NFPA 70 — National Electrical Code (US)
- NIST — Special Publication 811, Guide for the Use of the International System of Units (ft² and m²)
Frequently asked questions
Are kitchen remodel cost calculator results accurate enough to order materials?
No. The result is a budget, not a parts list. It multiplies floor area by one all-in rate, so it cannot say how many cabinets, how much worktop or which appliances you need. Use it to judge what a remodel might cost, then get itemised written quotes.
What build rate should I enter?
Use your contractor's quote per square foot (or per square metre on the metric version). The planning tiers are about $165, $325 and $555 per ft² (roughly $1,800, $3,500 and $6,000 per m²). They are examples, not surveyed averages. A kitchen's cost depends far more on cabinets, appliances and layout changes than on floor area, so a small premium kitchen can cost more per ft² than a large budget one. Contingency is a separate input on top.
Does this replace professional advice?
No. It is a planning estimator. It does not check the layout, ventilation, gas, electrics or plumbing, or tell you whether a permit is needed. Consult a licensed contractor or design professional, and ask your local building department what a remodel needs where you live.
Can I change the unit prices?
Yes. The area, build rate, contingency and tax fields are all editable. Enter 0 for contingency or tax to leave them out. The area and rate must be above zero, and a blank field is refused rather than guessed.
Spotted something off?
Calculations or display — let us know.
Related tools
Calculators from other categories that planners often reach for next.













