BuildMetricLab

Landscaping & Outdoor

Sand Calculator

Calculates sand by tons or cubic yards

Updated May 13, 2026 · Live

What this tool does

Calculates sand by tons or cubic yards. Paver sand, play sand, all-purpose sand.

Estimates sand volume in cubic yards and weight in tons from the area and depth you enter.

Inputs
ft²
in
$
Result

Sand Required

1.25 tons

Volume
0.93 yd³
Weight
1.25 tons
Bulk Bags (1 ton)
2
Estimated Cost
$47.45
Price it on PlainEstimate

Opens these materials as a new estimate on PlainEstimate, our free estimate and invoice app.

Plain Estimate
From BrightScale Labs
Invoice maker
Quote at the door. Signed on the spot.
Estimates and invoices for trades, built while you are still in the room.
Scan to get
Get it onGoogle Play

People also use

Formula Used
T=A⋅d⋅ρ1000T = \frac{A \cdot d \cdot \rho}{1000}
TT
Sand tonnes required
AA
Coverage area
dd
Layer depth
ρ\rho
Loose density

How the sand calculator works

Sand is ordered by weight but laid by depth, so the tool first finds the volume and then the weight. The formulas are volume = area × depth and weight = volume × density. The density is a fixed 1,600 kg/m³, which is 2,697 lb/yd³ or about 1.35 short tons per cubic yard. With the defaults, 100 ft² (9.3 m²) at 3 in (76 mm) is 100 × 3 ÷ 12 = 25 ft³ = 0.93 yd³ (0.71 m³). That weighs 0.926 × 1.3485 = 1.25 tons (1.13 tonnes). At $38 a ton the cost is $47.45, and the tool counts 2 bulk bags of 1 ton.

Metric works the same way. The UK page default of 10 m² (108 ft²) at 60 mm (2.4 in) is 0.60 m³ (0.78 yd³), or 960 kg (2,116 lb).

Check the depth you enter against the job. A paver bedding layer is thin, about 1 in (25 mm), and it sits on a compacted base, so it needs far less sand than a levelling layer or a sandpit. A 4 ft × 4 ft (1.2 m × 1.2 m) play pit filled to 8 in (200 mm) is 16 × 8 ÷ 12 = 10.7 ft³ = 0.40 yd³, which is about 0.53 tons (0.48 tonnes). Measure the area in plan, in feet or metres, and do not use a sloped surface. If the ground is uneven, take an average depth from several points.

Typical US landscaping and outdoor wastage

The tool has no wastage input. It gives the volume you enter and no more. Sand settles when compacted, spills off the barrow and is lost at irregular edges, so many installers add 5–10%. For the default, a 10% allowance takes 1.25 tons to 1.37 tons. Raise the depth or the area to include it. As a bedding layer for pavers, the laid depth is usually about 1 in (25 mm), and ICPI guidance for interlocking pavers is the usual source; a 200 ft² (18.6 m²) patio at 1 in is 16.7 ft³ = 0.62 yd³ = 0.83 tons (0.76 tonnes).

What this tool does not do

It does not choose a grade. Bedding sand, concrete sand, masonry sand and play sand are different products with different grading, and the density differs with them and with moisture. Damp sand weighs noticeably more than dry sand, and you pay by weight. The tool does not plan the base below the sand, the edge restraint, or any mortar mix. It does not check drainage, structure or compliance with local rules.

On-site considerations for sand

Sand is crystalline silica, and dust from dry sweeping, cutting pavers or mixing dry materials is a lung hazard. In the United States see OSHA silica guidance; in Great Britain see the HSE. Keep dust down with water and wear suitable respiratory protection. A cubic yard of sand weighs about 1.35 tons (1.2 tonnes), so check the ground and any slope before a tipper delivers. Paving large areas can add runoff. Permeable paving and the stormwater rules for your area are covered in the US EPA guidance on permeable pavement.

Codes and compliance

Stormwater rules differ by municipality. Many set a threshold for impervious surface, often a share of the lot, above which a stormwater plan is needed. Accessory structures above a size limit, often 200 ft² (18.6 m²), need a permit, and setbacks from property lines vary by zoning district. A call to the local building department before you start costs nothing. Outside the US, use your own national and local rules.

Before you order

Ask the supplier for the delivered weight, the product name and the grade, and whether the load is dry or damp. Sand is usually sold by the ton or by the cubic yard, and loose volume and weight do not convert exactly. Compare two quotes on the same basis, and confirm where the truck can tip and how the load is protected from rain. For small jobs, bulk bags of about 1 ton avoid a pile on the drive.

Sand left uncovered gets wet and heavy, and a wet load can weigh 10–15% more than a dry one for the same volume. If you are billed per ton, ask whether the tonnage is weighed at the pit or at the site. Cover the pile with a tarpaulin until you spread it, and spread it the same day on a patio so rain does not wash the bedding layer out.

Adjusting the defaults

Every input can be changed. Price per ton is optional: leave it blank and the cost line disappears. The default price of $38 per ton is a placeholder, not a market figure, and delivery is often charged separately. If your supplier quotes per cubic yard, divide by 1.35 to compare per ton.

Using this sand calculator alongside other BuildMetricLab tools

Pair the sand with a base and a surface: the mortar calculator for joints, the gravel calculator for the sub-base, and the mulch calculator for beds. Everything runs in your browser, nothing is sent anywhere, and the formula is shown so you can check the maths.

Sources & methodology

Volume = area × depth. Weight = volume × 1,600 kg/m³ (2,697 lb/yd³, about 1.35 short tons per cubic yard), a planning figure for sand as delivered; dry, damp and compacted sand differ by up to 10–15%. Cost = tons × price per ton, where a short ton is 2,000 lb (907.18 kg). Area, depth and price are entered in the unit shown and converted exactly (1 ft² = 0.09290304 m², 1 in = 25.4 mm). Bulk bags are counted at 1 ton (US) or 800 kg (metric) and rounded up, with a small tolerance so an exact fit does not gain a bag. Blank, zero or negative area and depth are refused, a negative price is refused, and a blank price hides the cost. The tool adds no allowance for compaction or waste.

Frequently asked questions

Are sand calculator results accurate enough to order materials?

They are accurate to the numbers you enter. The volume is area × depth, and the weight uses a fixed 1,600 kg/m³ (about 1.35 short tons per cubic yard), so a different grade or damp sand shifts the tonnage. Check the final quantity with your supplier before ordering.

Does this calculator include extra material for waste or compaction?

No. It gives the volume and weight for the area and depth you enter, with no allowance added. Many installers add 5–10% for compaction, spillage and irregular edges; raise the depth or area slightly to cover it.

Does this tool replace the need for a licensed contractor or design professional?

No. It is a planning estimator. For work that affects structure, drainage or building code compliance, consult a licensed contractor or design professional, and check your local stormwater and permit rules.

Can I change the unit prices?

Yes. The price per ton is editable, and you can leave it blank to hide the cost line. Enter your supplier quote to get a total that matches your project.

Spotted something off?

Calculations or display — let us know.

Calculators from other categories that planners often reach for next.