BuildMetricLab

Landscaping & Outdoor

Mulch Calculator

Mulch cubic yards, 2 ft³ bags and cost from area and depth

Updated May 13, 2026 · Live

What this tool does

Estimates the cubic yards of mulch, the number of 2 ft³ bags and the cost for a garden bed from its area and depth.

Estimates the volume of mulch in cubic yards, the number of bags and the cost for a garden bed from its area and depth.

Inputs
ft²
in
$
Result

Mulch Required

0.93 yd³ (25.0 ft³)

Weight (approx)
546 lb
Bags (2 ft³)
13
Estimated Cost
$32.41
Price it on PlainEstimate

Opens these materials as a new estimate on PlainEstimate, our free estimate and invoice app.

Plain Estimate
From BrightScale Labs
Invoice maker
Quote at the door. Signed on the spot.
Estimates and invoices for trades, built while you are still in the room.
Scan to get
Get it onGoogle Play

People also use

Formula Used
V=A⋅d,W=V⋅ρV = A \cdot d,\quad W = V \cdot \rho
VV
Mulch volume
AA
Bed area
dd
Layer depth
WW
Mulch weight
ρ\rho
Loose density, about 350 kg/m³ (590 lb/yd³)

How the mulch calculator works

Mulch is sold by volume, so the amount you need is the area of the bed multiplied by the depth of the layer. This calculator takes the area and the depth, works out the volume, estimates the weight from a typical loose density and gives the cost. The formula is V = A × d for volume and W = V × ρ for weight. The page takes ft² and inches and converts internally, so the metric and US-unit versions of the same bed agree. One cubic yard is 27 ft³ or 0.7646 m³.

Example with the defaults on this page: a 100 ft² bed at 3 in deep is 100 × 3 ÷ 12 = 25 ft³, which is 0.93 yd³ or 0.71 m³. In 2 ft³ bags that is 25 ÷ 2 = 12.5, so 13 bags. At $35 per cubic yard the cost is 0.926 × 35 = $32.41. The weight at 350 kg/m³ is about 248 kg, or 546 lb.

A 500 ft² bed at 2 in needs 500 × 2 ÷ 12 = 83.3 ft³, which is 3.09 yd³, or 42 bags of 2 ft³, and costs $108.02 at $35. A 2 in layer of 100 ft² is 16.7 ft³, which is 0.62 yd³, or 9 bags. Moving from 2 in to 3 in adds half again as much mulch, so depth matters most.

Typical US landscaping and outdoor wastage

The tool adds no allowance, because the right figure depends on the bed. Mulch settles and breaks down once it is spread, and beds are rarely flat, so many installers add about 10%. That is a trade habit and not a published standard. On the 0.93 yd³ example, 10% extra is 1.02 yd³. If you can top up the bed in a few weeks, skip the extra and order what the tool says.

Depth is the other big lever. A 1 in (25 mm) error across 100 ft² changes the volume by 0.31 yd³, which is a third of the 3 in answer. Measure the bed and mark the depth with a stick, because a thin patch is easy to miss.

What this tool does not do

It does not choose a mulch, prepare the bed or place it. It does not include landscape fabric, edging, labour or delivery. It assumes the same depth over the whole bed, so a bed with mounds needs the extra added. It uses one density for all mulch, but dry bark, wet wood chip and compost-based mulch differ, so weight is only an approximation, and the cubic measure is the figure to order by.

On-site considerations for mulch

In the United States, university extension services recommend about 2 to 4 inches of mulch, keeping it a few inches back from the trunk. A thin layer lets weeds through and dries out fast, and a very deep layer can starve roots of air and hold too much water against stems. Pull the mulch back from tree trunks and building walls, leaving a gap of a few inches (the extension guides say 3 to 4 in) so the root flare stays visible. Piling mulch against a trunk, a so-called mulch volcano, can rot the bark and harbour pests, and extension services advise against it.

Spread mulch over moist, weeded soil. Mulch breaks down and feeds the soil, so top up each year or two instead of adding a thick new layer on top of an old one. Bagged mulch in the US usually comes in 2 ft³ bags, and 13.5 bags make a cubic yard, so a delivered yard is often cheaper than bags for a large bed.

Codes and compliance

Spreading mulch in a garden does not need a permit. Check local rules for fire risk if you live in a wildfire area, because dry wood mulch next to a building can burn, and keep it a safe distance from walls and decks. A bark layer can also affect drainage and the level against a damp-proof course, so keep it below the damp course on a house. Other countries have their own rules, so follow the ones where you build.

Before you order

Measure the bed and choose the depth. Decide whether to buy by the cubic yard in bulk or in bags, and compare the delivered price per cubic yard. Ask the supplier what is in the mulch, because a mix with fine material breaks down faster, and check that it is aged, since fresh wood can tie up nitrogen near new plantings. Look at a sample for any smell of sour, rotting material. Plan where the load will be tipped, because a bulk delivery of a cubic yard fills a driveway corner.

Adjusting the defaults

Every input is editable. The area and depth must be above zero. A blank or zero field is refused instead of silently using a default, and a blank price hides the cost line. For an irregular bed, split it into rectangles and circles and add the areas. The default depth is a normal depth for a bed, so change it for paths or a thin top-up.

Using this mulch calculator alongside other BuildMetricLab tools

Pair this estimate with the topsoil, compost and gravel calculators for the rest of a garden project. All BuildMetricLab tools run in your browser. Nothing you type is sent anywhere, and every formula is shown on the page so you can audit the maths.

Sources & methodology

Volume is area × depth: the page takes area in ft² and depth in inches, and gives cubic yards (1 yd³ = 27 ft³ = 0.7646 m³) and ft³. Weight is volume × a loose bulk density of 350 kg/m³, which is about 590 lb per yd³; mulch varies widely, and wet mulch is much heavier. The number of 2 ft³ bags is the volume in ft³ ÷ 2, rounded up (13.5 bags to a cubic yard). Cost is volume in yd³ × price per yd³, hidden if no price is entered. Area and depth must be above zero and the price zero or more. The tool assumes a uniform depth and applies no wastage or settling allowance.

Frequently asked questions

Are mulch calculator results accurate enough to order materials?

They are a sound starting quantity. The volume is exact for the area and depth you enter, but beds are rarely flat, and mulch settles and decays. Order by the cubic yard, add about 10% for an uneven bed, and ask the supplier how much their yard measures. Weight is only an approximation, because wet mulch can weigh far more than dry.

What wastage percentage should I use?

The tool adds no wastage. Mulch settles after it is spread, and beds are uneven, so many installers add about 10%. That is a trade habit, not a published standard. For the default 100 ft² at 3 in, which is 0.93 yd³, 10% extra is 1.02 yd³. Skip the extra if you can top up the bed later.

Is this a substitute for professional advice?

No. It estimates a quantity and a cost only. It does not choose a mulch, check your soil, or advise on trees and plants. For a large landscape, or if you are unsure about mulching around trees, ask a local extension service or an arborist.

Can I change the unit prices?

Yes. The price per cubic yard is editable, and a blank price hides the cost line so only the quantity shows. A price of zero is accepted. For bagged mulch, divide the bag price into about 13.5 bags per cubic yard to get a yard price. The area and depth must be above zero.

Spotted something off?

Calculations or display — let us know.

Calculators from other categories that planners often reach for next.