Landscaping & Outdoor
Grass Seed Calculator
Grass seed weight and bags for a new lawn or overseeding, by area
Updated May 13, 2026 · Live
What this tool does
Estimates the weight of grass seed and the number of bags for a new lawn or for overseeding, from area, seeding rate and bag size.
Estimates the weight of grass seed and the number of bags needed for a lawn from its area, the seeding rate and the bag size.
People also use
Formula Used
Formula Used
How the grass seed calculator works
Grass seed is sold by weight and sown by area, so the calculation is one multiplication. The seed needed is the lawn area multiplied by the seeding rate, G = A × r. The bag count is that weight divided by the bag weight and rounded up to a whole bag, and the cost is the bag count times the price. The page works in ft² and lb per 1,000 ft², and converts internally, so the metric and US-unit versions of the same lawn agree.
Example with the defaults on this page: 1,000 ft² at 7 lb per 1,000 ft² needs 7 lb of seed. With 5 lb bags that is 7 ÷ 5 = 1.4, so 2 bags, and at $22 a bag the cost is $44. In metric, 1,000 ft² is 92.9 m², 7 lb per 1,000 ft² is 34.2 g/m², and the seed is 3.18 kg.
A larger lawn: 5,000 ft² of turf-type tall fescue at 7 lb per 1,000 ft² needs 35 lb, which is exactly seven 5 lb bags, or $154. The same area in Kentucky bluegrass at 2.5 lb per 1,000 ft² needs only 12.5 lb, which is three 5 lb bags, or $66. In metric units, 150 m² at the default 35 g/m² needs 5,250 g, or three 2.5 kg bags.
Typical wastage for grass seed
The tool adds no wastage, because the right allowance depends on your site. Seed is lost to birds, wind and heavy rain, and sowing late in the season, when germination falls, calls for more. The Royal Horticultural Society suggests sowing about 50% more seed to make up for losses where birds are a problem. That would raise the 1,400 g example to 2,100 g. A higher rate is not always better. Penn State Extension notes that an excessively dense stand can bring disease problems and mower scalping, and that a rate that is too low gives a thin lawn where weeds do better.
The bag count rounds up, which is a built-in allowance of its own. In the 1,400 g example the one 2.5 kg bag leaves 1,100 g spare, which is enough to overseed bare patches later.
What this tool does not do
It does not choose a grass species or mix, test your soil, or time your sowing. It does not include topsoil, starter fertiliser, mulch, a roller, watering or the cost of preparing the ground. It prices seed bags only, and it is not a substitute for advice from a local extension service, landscaper or seed supplier.
On-site considerations for grass seed
Penn State Extension, in a table for home lawns in Pennsylvania, gives about 2 to 3 lb per 1,000 ft² for Kentucky bluegrass, 4 to 5 for perennial ryegrass and 6 to 8 for turf-type tall fescue. In metric those are about 10 to 15, 20 to 24 and 29 to 39 g/m². The ranges differ because the seeds differ in size: bluegrass seed is tiny, so a pound holds far more seeds than a pound of fescue.
Seed needs firm, level, weed-free soil, good seed-to-soil contact and steady moisture until it establishes. Rake the seed lightly into the surface and keep it moist. The RHS says seedlings appear in a week to ten days. Cool-season grasses germinate best in spring or early autumn once the soil is about 8 to 10°C (46 to 50°F) or warmer, and warm-season grasses need warmer soil, so check the type on your seed label. Hot, dry summers and cold late autumns are poor times to sow.
Codes and compliance
Sowing a lawn does not normally need a permit, but a few rules can affect it. Check that the seed label states the species, purity and germination rate, because seed-label rules in many countries require this. Steep banks can need erosion control, and some areas restrict watering or fertiliser use. Ask your local authority if the site is near a watercourse or on a slope.
Before you order
Measure the lawn, subtract beds and paths, and check the rate on the bag against the one you entered. A cheap mix may be mostly fast-growing ryegrass, which suits a play area but not a fine lawn. A mix with a higher price per kg can still cost less per m² if you can sow it at a lower rate. Compare bags by cost per area sown, not by price per bag. Buy fresh seed with a recent test date, because germination falls as seed ages.
Adjusting the defaults
Every input is editable. The area, rate and bag size must be above zero. A blank or zero field is refused instead of silently using a default, and a blank price hides the cost line. If your supplier gives a coverage in area per bag, divide the bag weight by that area to get the rate. Your own numbers always override the defaults.
Using this grass seed calculator alongside other BuildMetricLab tools
Pair this estimate with the sod or turf calculator to compare seeding against laying turf, and with the topsoil and mulch calculators for the bed beneath it. All BuildMetricLab tools run in your browser. Nothing you type is sent anywhere, and every formula is shown on the page so you can audit the maths.
Sources & methodology
Seed weight is lawn area × seeding rate. The page takes the area in ft² and the rate in lb per 1,000 ft², and converts them to m² and g/m² (1 lb per 1,000 ft² = 4.882 g/m²; 1 ft² = 0.0929 m²) so both unit systems give the same answer. Bags needed is the seed weight ÷ the bag weight, rounded up to a whole bag. Estimated cost is bags × price per bag, and is hidden if no price is entered. Area, rate and bag size must be above zero and the price zero or more. The default rate of 7 lb per 1,000 ft² (34 g/m²) sits within the tall fescue range of 6 to 8 lb per 1,000 ft² in Penn State Extension's table. The tool does not add a wastage allowance.
Frequently asked questions
Are grass seed calculator results accurate enough to order materials?
They are a good starting quantity. The weight is area × rate, so it is only as good as your area measurement and the rate you enter. Round up to whole bags, which the tool does. If you are sowing late in the season or expect bird losses, sowing about 50% more seed is a common precaution, as the Royal Horticultural Society notes.
What seeding rate should I use?
Use the rate on your seed label. As a guide, Penn State Extension lists about 2 to 3 lb per 1,000 ft² for Kentucky bluegrass, 4 to 5 for perennial ryegrass and 6 to 8 for turf-type tall fescue. In metric that is about 10 to 15, 20 to 24 and 29 to 39 g/m². Overseeding an existing lawn usually takes about half the new-lawn rate.
Is this tool a substitute for professional advice?
No. It estimates seed quantity and cost only. It does not choose a species, check your soil, or time the sowing. For soil testing and grass choice for your area, ask a local extension service or landscape professional.
Can I change the unit prices?
Yes. The bag price is editable, and a blank price hides the cost line so only the quantity shows. A price of zero is accepted if you already have the seed. The area, rate and bag size must be above zero.
Spotted something off?
Calculations or display — let us know.
Related tools
Calculators from other categories that planners often reach for next.













