BuildMetricLab

Kitchen

Kitchen Renovation Cost Calculator

Estimates kitchen renovation cost from floor area, a quoted rate, contingency and tax

Updated October 28, 2026 · Live

What this tool does

Estimates the cost of a kitchen renovation from the floor area, an all-in rate per square foot or square metre, a contingency percentage and the tax rate, with the base cost, contingency and tax shown separately.

Kitchen Renovation Cost Calculator: floor area × build rate × (1 + contingency) × (1 + tax), with the base cost, contingency and tax line shown.

Inputs
ft²
$
%
%
Result

Kitchen Renovation (incl. contingency)

$40,040.00

Area
130.0 ft²
Build Rate
$280.00/ft²
Base Cost
$36,400.00
Contingency @ 10%
$3,640.00
Planning Note
Figure assumes straightforward access; complex site conditions can add roughly 15–30%
Plain Estimate
From BrightScale Labs
Invoice maker
Quote at the door. Signed on the spot.
Estimates and invoices for trades, built while you are still in the room.
Scan to get
Get it onGoogle Play

People also use

Formula Used
C=A⋅r⋅(1+g100)(1+t)C = A \cdot r \cdot \left(1 + \frac{g}{100}\right)(1 + t)
CC
Kitchen renovation cost
AA
Floor area
rr
Build rate per ft² (editable)
gg
Contingency percentage
tt
Sales tax rate (editable)

How the kitchen renovation cost calculator works

Cost = floor area × build rate × (1 + contingency) × (1 + tax). Enter the kitchen's floor area, an all-in rate per square foot or square metre from a quote, a contingency percentage and, if the quote leaves it out, your sales tax or VAT rate. The calculator returns the base cost, the contingency, the tax line and the total. With the US defaults, 130 ft² (12.1 m²) at $280 per ft² is $36,400, 10 percent contingency adds $3,640, and the total is $40,040. On the metric side the defaults are 12 m² at $3,000 per m², which is $36,000 plus $3,600, or $39,600.

The rate is the number that decides the answer, and it is yours to supply. The defaults are placeholders, not a survey of prices. The tooltip tiers of $140, $280 and $465 per ft² (about $1,500, $3,000 and $5,000 per m²) only bracket a plausible spread, because a kitchen's cost moves with the cabinetry, worktop, appliances, the amount of plumbing and electrical work, and the region far more than any average can capture. A written quote for your own room replaces them.

What the build rate covers

A build rate is an all-in figure per unit of floor area: cabinets, worktops, appliances, flooring, splashback, lighting, plumbing and electrical work, labour, waste removal, and the contractor's overhead and margin. That is why the same room can be quoted at very different rates. Stock cabinets, laminate worktops and the existing layout sit at the low end. Custom joinery, stone or quartz surfaces, relocated plumbing and a new ventilation duct sit at the top. Ask what a rate includes before you compare two quotes, in particular whether appliances, decoration, making good and design fees are in or out.

What this tool does not do

It does not design the kitchen, count cabinets or price individual items. It does not know whether walls are being moved, whether the floor needs levelling or whether the wiring needs replacing, and any of those can change the rate by a large margin. Floor area is also a blunt driver: a small kitchen costs more per square foot or metre than a large one with the same finishes, because the cabinets and appliances do not shrink with the room. Treat the result as a budget to test against quotes, not as a price.

On-site considerations for kitchen renovation cost

Measure the floor area wall to wall, as length × width. A 3.6 × 3.3 m room is 11.88 m² (127.9 ft²), and a 12 × 11 ft room is 132 ft² (12.3 m²). Open-plan kitchens need a decision about where the kitchen ends and the living area begins, and quotes should use the same boundary as your measurement. The usual sources of overrun are behind the walls and under the floor: old wiring, corroded pipework, uneven or damp floors and asbestos in older buildings. They are what the contingency is for, and 10 to 15 percent is a common allowance on renovation work. Moving the sink, hob or extraction point costs more than swapping fittings in place, so a layout change is the first thing to price separately.

Codes and compliance

Kitchen work touches electrics, gas, plumbing and ventilation, and the rules are regional. In the United States, the National Electrical Code (NFPA 70) requires at least two 20-amp small-appliance circuits for countertop receptacles and protection such as GFCI and AFCI in kitchens, and the International Residential Code covers range hood ducting and makeup air in its exhaust chapter (M1503); states adopt both with amendments, and recirculating hoods are treated differently from ducted ones, so check the edition in force locally. In England, new circuits are notifiable under Approved Document P and kitchen extract ventilation falls under Approved Document F. Canada applies the National Building Code and the Canadian Electrical Code by province, and Australia applies the National Construction Code with AS/NZS 3000 for wiring. None of these requirements is built into the calculator. Gas and electrical work should be done by a licensed professional, such as a Gas Safe engineer or NICEIC electrician in the UK, and structural changes need an engineer's sign-off.

Before you order

Get at least three written quotes on the same specification, in the same units as the calculator, and confirm the area each contractor measured against your own. Ask whether tax is included and set the tax field to match; a quote that already includes it needs 0 here. Made-to-order cabinets usually have the longest lead time, and worktops are normally templated after the cabinets are fitted, so they arrive last. Order the long-lead items first and agree what happens to the programme if one is late.

Adjusting the defaults

Every field is editable and the result updates as you type. The area must be above zero, the rate runs from $70 to $835 per ft² (about $753 to $8,988 per m²) on the US side, contingency from 0 to 50 percent and tax from 0 to 15 percent. Switching to metric changes the inputs to square metres and a rate per square metre in the same currency. The contingency sits on the base cost and the tax on both, so 130 ft² at $280 with 10 percent contingency and 7 percent tax is $36,400 plus $3,640 plus $2,802.80, or $42,842.80. For a budget job, 100 ft² at $140 with 15 percent contingency is $16,100; for a premium kitchen, 200 ft² at $465 with 10 percent contingency and 8 percent tax is $110,484; and a UK job of 15 m² at £2,200 with 10 percent contingency and 20 percent VAT is £43,560.

Using this kitchen renovation cost calculator alongside other BuildMetricLab tools

The range hood calculator sizes extraction for the cooker, and the kitchen backsplash and kitchen grout calculators work out tile and grout quantities once the layout is fixed. The bathroom renovation cost calculator uses the same method for another wet room. Every BuildMetricLab tool runs in your browser, with no sign-up and no data sent anywhere, and the formula is shown on the page so the maths can be checked.

Sources & methodology

Total = area × build rate × (1 + contingency ÷ 100) × (1 + tax ÷ 100). The rate is an all-in installed figure per ft² or m² of floor area entered by the user (the adapter converts a US rate per ft² to per m² at 0.09290304 m² per ft²); the defaults of $280 per ft² and $3,000 per m², with tooltip tiers of $140, $280 and $465 per ft², are placeholders from the tool's rate table, not market data. Contingency applies to the base cost and tax to the base plus contingency. The tax field defaults to 0 and is named for the page currency (Sales Tax, VAT, GST). Inputs are validated: area and rate above zero, contingency not negative, negative tax treated as none.

Frequently asked questions

Are kitchen renovation cost calculator results accurate enough to order materials?

No. This tool budgets the whole renovation from floor area, not the materials, and the result is only as accurate as the rate you enter. The arithmetic is exact: area × rate, plus contingency, plus tax. With a contractor's quoted rate for your specification and a measured area it will match the quote; with the placeholder default it is a rough order of magnitude. Order from itemised supplier quotes, not from this total.

What build rate should I enter?

The all-in installed rate per square foot or square metre of floor area from a quote for your own kitchen: stock cabinets and laminate worktops at the low end, mid-range joinery with quartz in the middle, custom cabinetry and stone at the top. The default of $280 per ft² (about $3,000 per m²) is a placeholder, and the tooltip tiers of $140 and $465 only bracket the spread. Contingency is a separate input on top of the rate.

Is this a substitute for professional advice?

No. It is a planning estimate. Layout, structure, gas, electrical, plumbing, ventilation and fire requirements are set by the building code where you are and by the condition of the building, and a designer or contractor should confirm the specification before it is priced. Gas and electrical work needs a licensed professional (for example a Gas Safe engineer or NICEIC electrician in the UK), and structural changes need a chartered or licensed structural engineer.

Can I change the unit prices?

Yes. The rate field is the only price and it takes any figure in the page currency, per square foot on the US side or per square metre on the metric side; the contingency and tax percentages are editable too. Enter the rate exactly as the quote states it, and set tax to 0 if the quote already includes it, so the total is not taxed twice.

Spotted something off?

Calculations or display — let us know.

Calculators from other categories that planners often reach for next.