BuildMetricLab

Driveway & Hard Paving

Driveway Cost Calculator

Estimates driveway cost from area, build rate and contingency

Updated May 13, 2026 · Live

What this tool does

Estimates total driveway cost from the area, an all-in build rate per ft², a contingency and sales tax you enter.

Estimates total driveway cost from the area, build rate, and contingency you enter.

Inputs
ft²
$
%
%
Result

New Driveway (incl. contingency)

$4,398.90

Area
430.0 ft²
Build Rate
$9.30/ft²
Base Cost
$3,999.00
Contingency @ 10%
$399.90
Planning Note
Figure assumes straightforward access; complex site conditions can add roughly 15–30%
Plain Estimate
From BrightScale Labs
Invoice maker
Quote at the door. Signed on the spot.
Estimates and invoices for trades, built while you are still in the room.
Scan to get
Get it onGoogle Play

People also use

Formula Used
C=A⋅r⋅(1+g100)(1+t)C = A \cdot r \cdot \left(1 + \frac{g}{100}\right)(1 + t)
CC
Driveway cost
AA
Driveway area
rr
Build rate per ft² (editable)
gg
Contingency percentage
tt
Sales tax rate (editable)

How the driveway cost calculator works

The calculator multiplies the driveway area by an all-in build rate, adds a contingency percentage, and then adds any sales tax or VAT you enter. The formula is C = A × r × (1 + g/100) × (1 + t), where A is the area, r is the rate per unit of area, g is the contingency percentage and t is the tax rate as a fraction. It has no surface-type input: the surface shows up only through the rate you type, so a gravel quote and a block-paving quote give different totals only because their rates differ.

Worked example in US units: a 600 ft² driveway at $12 per ft² has a base cost of 600 × 12 = $7,200. A 10% contingency adds $720, giving $7,920. At 7% sales tax the total is 7,920 × 1.07 = $8,474.40. The same job in metric units is 55.74 m² at $129.17 per m², because 1 m² is 10.7639 ft². The total does not change when you switch units, only the way the area and rate are written. With the defaults (430 ft² at $9.30 per ft², 10% contingency, no tax) the result is 430 × 9.30 = $3,999.00, plus $399.90, which is $4,398.90.

What the build rate covers

The build rate is an all-in figure per unit of area: labor, materials, equipment hire, and the contractor's overhead and margin in one number. It varies with the surface, the depth of the sub-base, the access for machinery, and the region, so the default is a starting point and not a price list. The tooltip shows three planning tiers: about $4.60, $9.30 and $19 per ft² (roughly $50, $100 and $200 per m²). Gravel and basic asphalt tend to sit near the low end, poured concrete in the middle, and pavers, stamped concrete or resin-bound surfaces higher. Treat that ordering as general trade experience, not a quoted price.

Convert a rate from one system to the other by multiplying or dividing by 10.7639. A quote of $10.76 per ft² is $115.82 per m², and a quote of £110 per m² is about £10.22 per ft². Make sure the currency matches the page, because the calculator does not convert money.

What this tool does not do

It does not replace a contractor's quote, price a particular surface, or allow for regional price differences. It also does not check structural adequacy, drainage design, or code compliance. Excavation of poor ground, removal of an old driveway, retaining walls, edging, new drainage and a dropped curb or apron are often priced separately, so check whether your quotes include them before comparing totals. Those matters stay with a suitably qualified designer, engineer or your local building official.

On-site considerations for driveway cost

Access is the biggest swing factor. A site where a truck cannot reach the work area means hand digging and barrowing, which raises labor sharply. Sloping ground, tree roots, soft subsoil and the removal of spoil all add cost, and they are the main reason the result shows a note that difficult sites can cost more. Where a driveway meets a public street, many jurisdictions require a permit from the local public works or highway department. Setback, width and slope limits differ by city and county, so ask before you commit to a layout.

Codes and compliance

In most places, runoff from a driveway must not flow uncontrolled onto the public road or a neighbor's land. Permeable surfaces such as open-graded gravel, permeable pavers or porous asphalt let water soak into the ground, and a drain to a soakaway or dry well is another common answer. The US Environmental Protection Agency describes how permeable pavement works and where it suits. In England, front-garden paving of more than 5 m² (about 54 ft²) needs planning permission unless it is permeable or drains to a permeable area, which is a UK rule and not a global one. Whatever your location, a short pre-application question to the local authority is cheaper than correcting work after an inspection.

Before you order

This tool gives a cost, not a material quantity. If you are laying pavers or blocks, order about 10% extra for cuts and spares. That is a common allowance, not a fixed rule, and complex patterns need more. Pavers from different production batches can differ slightly in color, so spares from the original batch help with later repairs. Compare the calculator result with at least three written quotes, ask each contractor for the surface specification and sub-base depth, and confirm lead times and whether tax and disposal are included.

Adjusting the defaults

Every input can be edited. Enter your own area, build rate, contingency and tax rate and the total updates at once. The area field takes ft² in the US view and m² in the metric view. The contingency default of 10% is a common planning allowance for unforeseen costs, and higher values suit older sites or unknown ground. Sales tax defaults to 0% on this page because tax on construction work varies by state and is sometimes charged within the contractor's price, so set your local rate only if it applies to your quote. A blank rate, area, contingency or tax field returns a message instead of a result, so an empty box is never treated as zero by mistake.

Using this driveway cost calculator alongside other BuildMetricLab tools

Use the cost figure to set a budget, then work out quantities with the related tools linked below, such as the concrete driveway, resin-bound and stepping-stone calculators. Those return volumes and weights you can give a supplier. All BuildMetricLab tools run in your browser with no sign-up, and every formula is shown on the page so you can check the arithmetic yourself.

Sources & methodology

The total is C = A × r × (1 + g/100) × (1 + t). A is the driveway area, r is the all-in build rate per unit of area, g is the contingency percentage and t is the tax rate as a fraction, applied to the cost plus contingency. All three money inputs are yours: the tool bakes in no tax and no regional rate, and the tier rates in the tooltip are planning figures only. Areas are held internally in m² (1 m² = 10.7639 ft²) and rates are converted to match, so the total is the same in either unit system. Blank, zero or negative area and rate, and blank or negative contingency, return a message instead of a result. A negative tax entry is treated as no tax. The tool does not price a specific surface, and excavation, drainage, edging and a dropped curb are not added separately.

Frequently asked questions

Are driveway cost calculator results accurate enough to order materials?

No. The result is a cost, not a material quantity, and it depends entirely on the build rate you enter. Use it to set a budget, then get written quotes. Site conditions, surface, sub-base depth and local rates all change the final figure.

What build rate should I enter?

Enter a rate from your own quote if you have one. Without one, the mid-tier default is $9.30 per ft² (about $100 per m²), with budget at $4.60 and premium at $19 per ft². These are planning figures, not current market prices, and they vary widely by region and surface. Contingency is a separate input, so do not add it to the rate.

Does this replace professional advice?

No. This tool is a planning-level cost estimate and does not replace a contractor's quote or any permit or code sign-off. For work that changes drainage or grading, or that connects to a public road, check the rules with your local authority and use a licensed contractor or design professional.

Can I change the unit prices?

Yes. The area, build rate, contingency and tax fields are all editable. Enter your contractor's rate per ft² (or per m² in metric view) and your local tax rate to get a total that matches your quote. Leaving a field blank returns a message, not a zero.

Spotted something off?

Calculations or display — let us know.

Calculators from other categories that planners often reach for next.