BuildMetricLab

Driveway & Hard Paving

Block Paver Calculator

Calculates concrete or brick driveway pavers by area

Updated May 13, 2026 · Live

What this tool does

Calculates concrete or brick driveway pavers by area. Belgard, Pavestone, Techo-Bloc.

Estimates the number of block pavers needed to cover a driveway or paved area, including a wastage allowance.

Inputs
ft²
in
in
%
$
Result

Paving Blocks Required

1,926

Area
400.0 ft²
Blocks per ft²
4.5
Area Bought (incl. wastage)
428.0 ft²
Estimated Cost
$1,926.00
Price it on PlainEstimate

Opens these materials as a new estimate on PlainEstimate, our free estimate and invoice app.

Plain Estimate
From BrightScale Labs
Invoice maker
Quote at the door. Signed on the spot.
Estimates and invoices for trades, built while you are still in the room.
Scan to get
Get it onGoogle Play

People also use

Formula Used
N=⌈AbL⋅bW⋅(1+w)⌉N = \left\lceil \frac{A}{b_L \cdot b_W} \cdot (1 + w) \right\rceil
NN
Paving blocks required
AA
Paving area
bLb_L
Block length
bWb_W
Block width
ww
Wastage allowance (decimal)

How the block paver calculator works

Block pavers (called block paving in the UK) are bought by the piece or by the area they cover, so the calculator works out both. It divides the area to be paved by the face area of one paver, adds a wastage allowance for cuts, and rounds up: N = ⌈A ÷ (length × width) × (1 + w)⌉. It then prices the area you actually buy, which is the whole pavers times their face area. It runs in your browser and shows its formula.

The US default is 400 ft² (37 m²) of 8 × 4 in pavers. Each paver covers 32 in², or 0.222 ft², so 4.5 pavers cover a square foot, and 400 ft² takes 1,800. With 7% wastage that is 1,926 pavers, which cover 428 ft². At $4.50 per ft² the cost is $1,926.00. The metric default is 40 m² of 200 × 100 mm pavers, which is 50 per m² and 2,000 in total. With 7% wastage that is 2,140 pavers covering 42.8 m², and at 28 per m² they cost 1,198.40. Note that the price is applied to the 42.8 m² bought, not the 40 m² laid. On the laid area alone the cost would be 1,120.00, which is 78.40 too low.

Typical paver wastage

The default of 7% suits a plain rectangle laid in a simple pattern, where the cuts are only along the edges. Curves, circles, diagonal patterns, herringbone and layouts with many manhole covers or edges need more, and 10 to 15% is common. On the metric default, 15% raises the order from 2,140 to 2,300 pavers. Pavers are usually sold by the pack or pallet, so round up to whole packs and keep a few spare for repairs. A later batch can differ in colour, and the difference shows against the original.

What this tool does not do

It does not price the base, bedding sand, joint sand, edge restraints or labour, which can cost more than the pavers. It does not work out the depth of the base, which depends on the soil and the traffic. It treats the paver size you enter as its laid size, including the joint. Many pavers have spacer nibs, so the nominal size already allows for it. It is not a quote.

On-site considerations for block paver

A paved surface is only as good as what is underneath it. Interlocking Concrete Pavement Institute (ICPI) guidance, from the Concrete Masonry and Hardscapes Association, calls for a compacted aggregate base whose depth depends on soil and traffic, about 1 in (25 mm) of bedding sand, edge restraints to hold the pavers in place, and joints filled with sand. Pavers for vehicles are commonly 80 mm (3⅛ in) thick, and 60 mm (2⅜ in) is common for foot traffic only. The surface should slope away from buildings, with a minimum of about 2% (1/4 in per foot, or 20 mm per metre). Compact the base in layers and keep the sand layer an even thickness. Pavers laid on a poor base sink or move.

Codes and compliance

Rules on driveways and hard surfaces vary by country, state and council. In the US, a driveway that joins a public street usually needs a permit from the local public works department, and many places limit impermeable surface or require stormwater to be managed on site. In England, laying more than 5 m² of impermeable paving in a front garden needs planning permission unless the water drains to a lawn or border, or the surface is permeable, as set out in GOV.UK guidance on permeable surfacing of front gardens. Permeable pavers, which let water drain through the joints into a stone base, are one way to meet those rules. In the US, product standards for concrete pavers are published by ASTM International as ASTM C936. Other regions have their own product standards, so ask your supplier which one applies. Ask the local authority before you start.

Before you order

Check the actual paver size on the product data sheet, because the nominal size is not always the exact size, and enter what the supplier gives. Ask whether the price is per paver, per pack or per area, and whether it includes delivery. Compare the pack quantity with the calculator's count and round up to whole packs. Lay a few pavers dry to check the colour mix, and mix from several packs while you lay so that colour differences do not show as bands. Confirm the delivery date, and have the base finished first.

Adjusting the defaults

Every input is editable. Enter your own area, paver size, wastage and price per square foot or metre, and the result recalculates as you type. The defaults are placeholders, not market prices. Leave the price blank if you only want the paver count.

Using this block paver calculator alongside other BuildMetricLab tools

The asphalt, resin bound and stepping stone calculators in the same category cover other surfaces if you are comparing options for a drive or path. Every BuildMetricLab tool runs in your browser with no sign-up and nothing sent to a server, and each one shows its formula so you can check the maths.

Sources & methodology

Pavers = ⌈area ÷ (paver length × paver width) × (1 + wastage %)⌉, rounded up to whole pavers. Area bought = pavers × paver face area. Cost = area bought × price per unit area, so wastage is paid for. The paver size is taken as its laid size including the joint. The base, sand, edge restraints, labour and pack rounding are not modelled. A blank area, size, wastage or price field is refused. Every result is calculated from the values you enter, all inputs are editable, and no time-sensitive prices or rates are embedded.

Frequently asked questions

Are block paver calculator results accurate enough to order materials?

Use them as a starting estimate. The paver count is exact for the area, paver size and wastage you enter, but the real figure depends on the pattern, the cuts and how the supplier packs the pavers. Round up to whole packs and check the quantity with your supplier before ordering.

What wastage percentage should I use?

The calculator defaults to 7%, which suits a plain rectangle laid in a simple pattern. Use 10-15% for curves, circles, diagonal or herringbone patterns, or many edges and manhole covers. On the default 2,000 pavers, 15% makes 2,300 instead of 2,140. Lower values risk running short.

Is this a substitute for a licensed contractor or engineer?

No. This tool only produces a planning estimate. For work affecting drainage, structure or compliance with local rules, consult a licensed contractor or design professional before proceeding.

Can I change the unit prices?

Yes. Enter the price per square foot (or per m² on the metric version) from your supplier's quote. The calculator applies it to the area bought, including wastage. The default is a placeholder, not a market price. Leave the price blank if you only want the paver count.

Spotted something off?

Calculations or display — let us know.

Calculators from other categories that planners often reach for next.