Bathroom
Bathroom Tile Calculator
Calculates bathroom floor and wall tile by area
Updated May 13, 2026 · Live
What this tool does
Calculates bathroom floor and wall tile by area.
Estimates the number of floor or wall tiles needed for a bathroom based on area, tile size, and wastage.
People also use
Formula Used
Formula Used
How the bathroom tile calculator works
Tiles are bought by the piece, so the calculator turns an area into a tile count. It divides the area to be tiled by the face area of one tile, adds a wastage allowance for cuts and breakages, and rounds up: N = ⌈A ÷ (tile width × tile length) × (1 + w)⌉. It multiplies the count by your price per tile for a cost. It runs in your browser and shows its formula.
The US default is 120 ft² of 12 × 12 in tile. Each tile covers 1 ft², so 120 tiles cover the area, and 10% wastage makes 132 tiles. At $2.50 each that costs $330.00. The metric default is 12 m² of 300 × 300 mm tile. Each tile covers 0.09 m², so 133.33 tiles cover the area, 10% wastage makes 146.67, and rounding up gives 147 tiles, or £264.60 at £1.80 each. A smaller floor, such as 40 ft² (3.7 m²), needs 44 tiles of 12 in.
Typical bathroom wastage
Bathrooms need more allowance than open rooms, because the floor is cut around the toilet, the bath and the vanity, and the walls are cut around the shower, the window and the door. 10% is a sensible minimum for a straight layout, and 15% or more is common for diagonal patterns, mosaics, herringbone and large-format tiles that must be cut precisely. On the metric default, 15% raises the order from 147 to 154 tiles. Tiles are sold in boxes, so round up to whole boxes: if a box holds 10 tiles, 132 tiles is 14 boxes (140 tiles). Keep any spare, because later batches of the same tile can differ in colour or size.
What this tool does not do
It counts tiles from an area. It does not work out the area for you, so measure the floor and add the wall area separately. For a wall, multiply the width by the height and subtract windows and doors. For example, a 3 ft × 3 ft (0.9 m) shower with three tiled walls 7 ft (2.1 m) high has 3 × 3 × 7 = 63 ft² (5.9 m²) of wall. It uses the face size of the tile and ignores the grout joint, so the real count is about 2% lower for a 300 mm tile with a 3 mm joint. It leaves that margin in your favour. It does not price adhesive, grout, waterproofing, trim or labour.
On-site considerations for bathroom tile
Bathroom tiling is only as good as the waterproofing and the base underneath it. Showers and wet rooms need a waterproof membrane and a floor sloped to the drain; in the US a slope of about 1/4 in per foot (roughly 2%) is the usual minimum for a shower floor. A floor that flexes cracks tile and grout, so a timber floor is normally overboarded with cement board or a similar tile backer before tiling. For floors that get wet, choose a tile with a suitable slip-resistance rating. The ANSI A137.1 tile standard sets a minimum dynamic coefficient of friction (DCOF) of 0.42 for tiles intended for wet interior floors, and other regions have their own test methods. Large-format tiles need a flat base, and the flatter the surface, the easier they are to lay.
Codes and compliance
Waterproofing, ventilation, drainage and electrics in a bathroom are regulated, and the rules vary by country, state and city. In the US, the model International Residential Code (published by the International Code Council) is adopted and amended locally, and the tile industry's installation methods are collected in the TCNA Handbook, published by the Tile Council of North America. Other regions have their own installation standards, so ask your tile supplier or installer which apply to you. Plumbing, drainage, gas and electrical work are for licensed or registered tradespeople, and your local building department can tell you whether a permit is needed.
Before you order
Check the tile size on the product itself, because the nominal size is often not the exact size, and the calculator uses what you type. Compare the tile count with the supplier's own estimate, round up to whole boxes, and add a few spare tiles. Order everything from the same batch, and open a few boxes to check the colour before you start. Lay out the tiles dry, so you know how the cuts will fall at the edges and around the fixtures. Confirm the delivery date, and keep the boxes dry until you use them.
Adjusting the defaults
Every input is editable. Enter your own area, the tile size from the packaging, the wastage that suits your layout and the price per tile, and the result recalculates as you type. The defaults are placeholders, not market prices. Leave the price blank if you only want the tile count.
Using this bathroom tile calculator alongside other BuildMetricLab tools
The toilet clearance checker, bathroom remodel cost calculator and towel warmer BTU calculator in the same category cover other parts of a bathroom project. Every BuildMetricLab tool runs in your browser with no sign-up and nothing sent to a server, and each one shows its formula so you can check the maths.
Sources & methodology
Tiles = ⌈area ÷ (tile width × tile length) × (1 + wastage %)⌉, rounded up to whole tiles. Tile area uses the face size, so the grout joint is ignored and the count runs slightly high (about 2% for a 300 mm tile with a 3 mm joint). Cost = tiles × price per tile. Wall area, adhesive, grout, waterproofing and box rounding are not modelled. Every result is calculated from the values you enter, all inputs are editable, and no time-sensitive prices or rates are embedded.
Frequently asked questions
Are bathroom tile calculator results accurate enough to order materials?
Use them as a starting estimate. The count is exact for the area, tile size and wastage you enter, but the real figure depends on the layout, the cuts around fixtures and the actual tile size. Round up to whole boxes and check the quantity with your supplier before ordering.
What wastage percentage should I use?
The calculator defaults to 10%, a sensible minimum for a straight layout. Use 15% or more for diagonal patterns, mosaics, herringbone, large-format tiles or a room with many cuts around fixtures. Lower values risk running short, because offcuts and breakages are hard to avoid.
Is this a substitute for professional advice?
No. This tool is a planning estimator. Bathroom work involves waterproofing, plumbing, drainage and electrics, so use licensed or registered tradespeople where required and check the local building rules.
Can I change the unit prices?
Yes. Enter the price per tile from your supplier's quote. The default is a placeholder, not a market price. Leave the price blank if you only want the tile count.
Spotted something off?
Calculations or display — let us know.
Related tools
Calculators from other categories that planners often reach for next.













