Driveway & Hard Paving
Permeable Paving Calculator
Estimates permeable block paving and sub-base for SuDS driveways
Updated 29 April 2026 · Live
What this tool does
Estimates permeable block paving and sub-base for SuDS driveways.
People also use
How the permeable paving calculator works
Estimates permeable block paving and sub-base for SuDS driveways. The calculator takes your dimensions and supplier rates, applies a standard UK trade formula, and returns a quantity with an indicative cost. Every figure is an estimate — site conditions always move the final number.
Typical UK driveway and hard paving wastage
Block paving wastage is 5–7% on a rectangular drive, 10–15% on curves and circles. Gravel settles 10–15% with traffic. Our defaults reflect common UK trade allowances — adjust upwards for non-standard geometry, downwards if your experience says so.
What this tool does not do
It does not replace a professional quote, factor regional pricing, assess structural adequacy, or confirm Building Regulations compliance. Those remain the responsibility of a suitably qualified designer, surveyor, or your building control officer.
On-site considerations for permeable paving
Permeable paving does not need planning permission on front gardens; impermeable surfaces over 5 m² do (or need an approved SUDS solution under the 2008 regulation change).
Building Regulations and compliance
Surface water from a drive must not run onto the public highway. Approved Document H and local bylaws require drainage to soakaway, permeable joints, or attenuation. When in doubt, lodge a pre-application enquiry with your local authority — early clarity is cheaper than a retrospective correction.
Before you order
Order 10% more blocks than the calculator result to keep as spares — colour batches drift year-on-year and repairs with a new batch will be visible. Always cross-check the calculator's output against a supplier quote — ask for exact product specifications (grade, finish, batch number) and confirm delivery timescales against your programme.
Adjusting the defaults
Every input in this calculator is editable. Enter your own dimensions, supplier prices, and wastage allowance — the output recalculates instantly. If the defaults feel off for your region or project type, your own numbers always override them.
Using this permeable paving calculator alongside other BuildMetricLab tools
This calculator works best as part of a planning workflow. Pair the quantity with our project contingency, labour-hours, and material-cost calculators to build a complete estimate before you pick up the phone to a supplier. All BuildMetricLab tools run entirely in your browser — no sign-up, no data sent anywhere, and every formula is shown on-page so you can audit the maths.
Sources & methodology
Estimates permeable block paving and sub-base for SuDS driveways. Uses UK trade defaults for wastage and density. Prices are illustrative April 2026 values; change them to match your supplier quote.
Frequently asked questions
Are permeable paving calculator results accurate enough to order materials?
Use them as a starting estimate only. Always verify the final quantity with your supplier or contractor before ordering — site conditions, wastage and cut-offs all affect the true figure.
What wastage percentage should I use?
The calculator defaults to the typical UK trade allowance for driveway & hard paving. Increase it for complex cuts, awkward shapes, or first-time DIY. Reducing the wastage below the default is not recommended.
Does this replace professional advice?
No. This tool is a planning estimator. For works that affect structure, Building Regulations, Party Wall, gas, electrics, drainage to a sewer, or similar, consult a suitably qualified professional.
Can I change the unit prices?
Yes — every price field is editable. Plug in your supplier's quote to get a total that matches your project.
Related tools
Calculators from other categories that planners often reach for next.